Explore topic-wise MCQs in Concrete Technology.

This section includes 263 Mcqs, each offering curated multiple-choice questions to sharpen your Concrete Technology knowledge and support exam preparation. Choose a topic below to get started.

1.

If the aggregate completely passes through a 50 mm sieve and retained on 40 mm sieve, then the particular aggregate is said to be flaky if its least dimension is less than

A. 27 mm
B. 37 mm
C. 47 mm
D. 57 mm
Answer» B. 37 mm
2.

The concrete mix of grade M 25 means that the compressive strength of 15 cm cubes at 28 days after mixing is

A. 15 N/mm2
B. 20 N/mm2
C. 25 N/mm2
D. 30 N/mm2
Answer» D. 30 N/mm2
3.

Tricalcium silicate develops strength in cement for first 7 days.

A. Yes
B. No
Answer» B. No
4.

The aggregate is said to be flaky when

A. its least dimension is three-fifth of its mean dimension
B. its least dimension is equal to its mean dimension
C. its length is equal to its mean dimension
D. its length is equal to 1.8 times its mean dimension
Answer» B. its least dimension is equal to its mean dimension
5.

An aggregate is said to be

A. coarse
B. fine
C. cyclopean
Answer» D.
6.

The value of bulk density for angular and flaky aggregates is

A. same
B. less
C. more
Answer» C. more
7.

The impact value of an aggregate is generally used as an alternative to its crushing value, to know the quality of aggregate.

A. Yes
B. No
Answer» B. No
8.

The aggregate is said to be elongated when

A. its least dimension is three-fifth of its mean dimension
B. its least dimension is equal to its mean dimension
C. its length is equal to its mean dimension
D. its length is equal to 1.8 times its mean dimension
Answer» E.
9.

The Indian standard code specifies that the crushing strength for which the mix should be designed in the laboratory should be

A. 1.25
B. 1.5
C. 2
D. 2.5
Answer» B. 1.5
10.

The main requirement, which a ware-house should fulfil is that

A. its walls should be water proof masonry construction
B. its roof should be leak-proof
C. it must have large number of windows
D. its plinth should be very high
Answer» F.
11.

If mineral oil is present in mixing water for concrete, it increases strength for a concentration upto 2 percent.

A. Yes
B. No
Answer» B. No
12.

If the slump of the concrete mix is less than 50 mm, then while compacting it with vibratiors, the segregation will not take place.

A. Right
B. Wrong
Answer» B. Wrong
13.

For heat and sound insulation purposes, we shall use

A. vacuum concrete
B. air-entrained concrete
C. saw dust concrete
D. both (b) and (c)
Answer» E.
14.

The finer the sand, greater is the bulkage.

A. Correct
B. Incorrect
Answer» B. Incorrect
15.

The most useless aggregate is, whose surface texture is

A. smooth
B. glossy
C. granular
D. porous
Answer» C. granular
16.

A moist aggregate is one

A. whose all the pores are filled with water and also having its surface wet
B. whose all the pores are filled with water but having its surface dry
C. which do not contain any moisture either in the pores or on the surface
D. which may contain some moisture in the pores but having dry surface
Answer» B. whose all the pores are filled with water but having its surface dry
17.

For batching 1 : 2 : 4 concrete mix by volume, the ingredients required per bag of cement are

A. 50 kg of cement : 70 kg of fine aggregate : 140 kg of coarse aggregate
B. 50 kg of cement : 70 litres of fine aggregate : 140 litres of coarse aggregate
C. 50 kg of cement : 100 kg of fine aggregate : 200 kg of coarse aggregate
D. 50 kg of cement : 100 litres of fine aggregate : 200 litres of coarse aggregate
Answer» C. 50 kg of cement : 100 kg of fine aggregate : 200 kg of coarse aggregate
18.

A suitable admixture added at the time of preparing the concrete mix, makes the concrete.

A. water proof
B. acid proof
C. highly strong
D. all of these
Answer» E.
19.

Reinforced cement concrete is equally strong in taking

A. tensile and compressive stresses
B. compressive and shear stresses
C. tensile, compressive and shear stresses
D. tensile and shear stresses
Answer» D. tensile and shear stresses
20.

The strength and durability of concrete depends upon

A. size of aggregates
B. grading of aggregates
C. moisture contents of aggregates
D. all of these
Answer» E.
21.

Concrete with higher compaction factor has less workability.

A. True
B. False
Answer» B. False
22.

The value of bulk density of the aggregate depends upon

A. size distribution of aggregate
B. shape of aggregate
C. specific gravity of aggregate
D. all of these
Answer» E.
23.

The bulk density of aggregates depends upon its

A. shape
B. grading
C. compaction
D. all of these
Answer» E.
24.

The concrete in which preliminary tests are performed for designing the mix is called

A. rich concrete
B. controlled concrete
C. lean concrete
D. ordinary concrete
Answer» C. lean concrete
25.

The phenomenon by virtue of which the cement does not undergo large change in volume when treated with water, is known as

A. fineness
B. soundness
C. setting time
D. none of these
Answer» C. setting time
26.

In the manufacture of cement, the dry or wet mixture of calcareous and argillaceous materials is burnt in a

A. country kiln
B. continuous flare kiln
C. rotary kiln
D. all of these
Answer» D. all of these
27.

Trowelling should be finished on the same day of its laying operation.

A. Yes
B. No
Answer» B. No
28.

The placing of concrete should start width-wide in reinforced cement concrete slabs from one end.

A. True
B. False
Answer» B. False
29.

The type of lime used in lime concrete is

A. fat lime
B. poor lime
C. slaked lime
D. hydraulic lime
Answer» E.
30.

The presence of dicalcium silicate in cement

A. hydrates the cement slowly
B. generates less heat of hydration
C. has more resistance to sulphate attack
D. all of these
Answer» E.
31.

The continuous strain, which the concrete undergoes due to application of external loads, is called

A. workability
B. bleeding
C. segregation
D. creep
Answer» E.
32.

The maximum particle size of coarse aggregate is

A. 45 mm
B. 55 mm
C. 65 mm
D. 75 mm
Answer» E.
33.

The usual proportion of ingredients in reinforced cement concrete is

A. Portland cement (1 part), clean sand (2 to 4 parts) and coarse aggregate (1 to 2 parts)
B. Portland cement (1 part), clean sand (1 to 2 parts) and coarse aggregate (2 to 4 parts)
C. Porland cement (1 part), clean sand and coarse aggregate (2 to 4 parts)
D. any one of the above
Answer» C. Porland cement (1 part), clean sand and coarse aggregate (2 to 4 parts)
34.

Segregation in concrete results in

A. honey combing
B. porous layers
C. surface scaling
D. all of these
Answer» E.
35.

The admixtures are added in concrete to

A. accelerate the rate of setting and hardening of cement
B. make the concrete water proof, acid proof etc.
C. reduce the bleeding and segregation of concrete mix
D. all of the above
Answer» E.
36.

Alumina in the cement lowers the clinkering temperature.

A. Agree
B. Disagree
Answer» B. Disagree
37.

When the sand is fully saturated, its volume is

A. equal to
B. less than
C. more than
Answer» B. less than
38.

The presence of tricalcium silicate in cement

A. hydrates the cement rapidly
B. generates less heat of hydration
C. offers high resistance to sulphate attack
D. all of these
Answer» B. generates less heat of hydration
39.

Vibrated concrete needs

A. less
B. high
Answer» B. high
40.

The workability of concrete mix increases with the increase in moisture content.

A. Agree
B. Disagree
Answer» B. Disagree
41.

The controlled concrete is used for

A. one grade of concrete mix
B. three grades of concrete mix
C. five grades of concrete mix
D. all the seven grades of concrete mix
Answer» E.
42.

If sea water is used for preparing concrete mix, it

A. reduces strength
B. corrodes steel reinforcement
C. causes efflorescence
D. all of these
Answer» E.
43.

According to IS : 269 - 1976, the requirement of an ordinary Portland cement is that

A. the residue does not exceed 10% when sieved through IS sieve No. 9
B. its expansion is not more than 10 mm for unaerated cement
C. its initial setting time is not less than 30 minutes
D. all of the above
Answer» E.
44.

The cement concrete, from which entrained air and excess water are removed after placing it in position, is called

A. vacuum concrete
B. light weight concrete
C. prestressed concrete
D. sawdust concrete
Answer» B. light weight concrete
45.

The concrete can be lifted by pumps through a maximum vertical distance of

A. 10 m
B. 20 m
C. 30 m
D. 50 m
Answer» E.
46.

The mixer, which produces a steady stream of concrete as long as it is in operation, is known as

A. non-tilling batch mixer
B. tilting type batch mixer
C. continuous mixer
D. none of these
Answer» D. none of these
47.

The 'first-in, first-out' rule should eb applied when cement hags are to be removed from the ware-house.

A. True
B. False
Answer» B. False
48.

Ordinary Portland cement should not be used for construction work exposed to sulphates in the soil.

A. Agree
B. Disagree
Answer» B. Disagree
49.

The presence of lime in cement

A. makes the cement sound
B. provides strength to the cement
C. lowers the clinkering temperature
D. all of these
Answer» C. lowers the clinkering temperature
50.

The placement of concrete should be discontinued during rainy periods

A. Yes
B. No
Answer» B. No