Explore topic-wise MCQs in Chemical Engineering.

This section includes 5314 Mcqs, each offering curated multiple-choice questions to sharpen your Chemical Engineering knowledge and support exam preparation. Choose a topic below to get started.

3651.

If a certain mass of steam is considered as the thermodynamic system, then the energy equation become?

A. Q=ΔKE + ΔPE – ΔU + W
B. Q=ΔKE + ΔPE – ΔU – W
C. Q=-ΔKE – ΔPE + ΔU + W
D. Q=ΔKE + ΔPE + ΔU + W
Answer» E.
3652.

What is the range of current density for large power transformer with self oil cooled type?

A. 1-2 A per mm<sup>2</sup>
B. 1.5-2.5 A per mm<sup>2</sup>
C. 2.2-3.2 A per mm<sup>2</sup>
D. 2-3 A per mm<sup>2</sup>
Answer» D. 2-3 A per mm<sup>2</sup>
3653.

What is the internal Vref of an Atmega32 series?

A. 5V
B. 3.3V
C. 2.56V
D. all of the mentioned
Answer» D. all of the mentioned
3654.

Which of the following detector uses ultraviolet radiation from lamps to produce ionisation of solute molecules?

A. Sulphur chemiluminescense detector
B. Thermal conductivity detector
C. Photo ionization detector
D. Electron capture detector
Answer» D. Electron capture detector
3655.

______________ requires that data should be made available to only authorized users?

A. Data integrity
B. Privacy
C. Security
D. None of the Mentioned
Answer» D. None of the Mentioned
3656.

Reduction in the volume due to shrinkage causes _________?

A. Low volume
B. Volumetric strain
C. Volumetric stress
D. W/c ratio
Answer» C. Volumetric stress
3657.

If A, B and C are any three sets, then A √ó (B ‚à™ C) is equal to?#

A. (A √ó B) ‚à™ (A √ó C)
B. (A √ó B) ‚à© (A √ó C)
C. (A ‚à™ B) √ó (A ‚à™ C)
D. None of the mentioned
Answer» B. (A ‚Äö√†√∂‚àö‚â• B) ‚Äö√Ñ√∂‚àö‚Ƭ¨¬© (A ‚Äö√†√∂‚àö‚â• C)
3658.

To access the binding and validation result for the command object?

A. Errors
B. BindingResult
C. All of the mentioned
D. None of the mentioned
Answer» D. None of the mentioned
3659.

The rectangular type of C.T. is built of ________?

A. L shaped windings
B. T shaped windings
C. A shaped windings
D. Z shaped windings
Answer» B. T shaped windings
3660.

What does steam power plant mainly use to generate steam?

A. Boiled water
B. Fresh steam
C. Flue gas
D. Condensed water
Answer» D. Condensed water
3661.

The __________ is a test method just like that of Roe, except the CIO2 is generated in sit by acidification of sodium hypochlorite?

A. Klason lignin
B. Kappa number
C. Chlorine number
D. Roe number
Answer» D. Roe number
3662.

The analysis of circular cylindrical shells with prestressed edge beam is more or less similar to?

A. Prestressed concrete beam
B. Reinforced concrete beam
C. Chemically prestressed beam
D. Partially prestressed beam
Answer» C. Chemically prestressed beam
3663.

Which of the following is true in case of Overlap add method?

A. M zeros are appended at last of each data block
B. M zeros are appended at first of each data block
C. M-1 zeros are appended at last of each data block
D. M-1 zeros are appended at first of each data block
Answer» D. M-1 zeros are appended at first of each data block
3664.

Which one of the following is not a factor for calculating speed breaches by the FMS?

A. Aircraft weight
B. CG position
C. Wind and temperature models
D. Position of the aircraft
Answer» E.
3665.

EF = (Ec+ Ev)/2, this represents the Fermi energy level of which of the following?

A. Extrinsic semiconductor
B. N-type semiconductor
C. P-type semiconductor
D. Intrinsic semiconductor
Answer» E.
3666.

The (1071729)th derivative of f(x) = (x6 + x4 + x2) cosh(x) at x = 0 is given b?

A. 0
B. 1071
C. 1729
D. ‚àû
Answer» B. 1071
3667.

A balloon behaves such that pressure inside it is proportional to the diameter squared. It contains 2kg of ammonia at 0°C, 60% quality. They are now heated so that the final pressure is 600 kPa. Find the work done in the process?#

A. 117.5 kJ
B. 127.5 kJ
C. 137.5 kJ
D. 147.5 kJ
Answer» B. 127.5 kJ
3668.

The ___________ forces do not cause the rotation?

A. Non-concurrent
B. Concurrent
C. Parallel
D. Non-Parallel
Answer» C. Parallel
3669.

On average, what is the maximum use temperature of engineering ceramics?

A. 260<sup>o</sup>C
B. 815<sup>o</sup>C
C. 1200<sup>o</sup>C
D. 2760<sup>o</sup>C
Answer» E.
3670.

Which is the property of a Window object that holds the name of the frame?

A. name
B. title
C. description
D. style
Answer» B. title
3671.

Which of the following cannot be used repeatedly for making moulds?

A. Sillimanite
B. Dolomite
C. Natural Sand
D. Silica Sand
Answer» D. Silica Sand
3672.

Degree of accuracy for tested chain is ________?

A. 1 in 100
B. 1 in 1000
C. 1 in 10,000
D. 1 in 10
Answer» C. 1 in 10,000
3673.

A multimode fiber has refractive indices n1= 1.15, n2=1.11 and an operating wavelength of 0.7μm. Find the radius of curvature?#

A. 8.60μ<sub>m</sub>
B. 9.30μ<sub>m</sub>
C. 9.1μ<sub>m</sub>
D. 10.2μ<sub>m</sub>
Answer» C. 9.1‚âà√≠¬¨‚à´<sub>m</sub>
3674.

The method in which the series of dimensions are applied from one point to other is called ________?

A. Parallel dimension
B. Chain dimensioning
C. Combined dimensioning
D. Tabular dimensioning
Answer» C. Combined dimensioning
3675.

7x = 6 mod 5. Then the value of x i?

A. 2
B. 3
C. 4
D. 5
Answer» C. 4
3676.

If SWR=1.5 with a wavelength of 4 cm and the distance between load and first minima is 1.48cm, then the reflection coefficient is?

A. 0.0126+j0.1996
B. 0.0128
C. 0.26+j0.16
D. none of the mentioned
Answer» B. 0.0128
3677.

The _____ signal is used to indicate the beginning of a new frame?

A. Start
B. SOF
C. BEG
D. None of the mentioned
Answer» C. BEG
3678.

Which of the following dimension needs to be calculated?

A. Length of the rectangle
B. Breadth of the rectangle
C. Diameter of circle
D. Position of circle
Answer» D. Position of circle
3679.

The sand carrying the compressed air stream in the core blowing machine is responsible for filling the core box and ramming the core?

A. True
B. False
Answer» B. False
3680.

Which of the following is not promoted by histone tail modification?

A. Formation of repressive structures
B. Gene expression
C. Nucleosome remodeling
D. Nucleosome sliding
Answer» E.
3681.

Core flux in the transformer is ______________?

A. sinusoidal
B. flat-topped
C. square wave
D. triangular
Answer» C. square wave
3682.

Assume that the operators +,-, X are left associative and ^ is right associative?

A. is ^, X, +, -. The postfix expression for the infix expression a + b X c – d ^ e ^ f is
B. abc X+ def ^^ –
C. abc X+ de^f^ –
D. ab+c Xd – e ^f^
Answer» B. abc X+ def ^^ ‚Äö√Ñ√∂‚àö√ë‚àö¬®
3683.

Statement 1: When several factors for food processing and preservation are applied to one food product, it is called Hurdle technology?

A.
B. True, False
C. True, True
Answer» C. True, True
3684.

Lithium soap greases are______?

A. temperature resistant
B. fire resistant
C. water resistant
D. pressure resistant
Answer» D. pressure resistant
3685.

What are ‘Wings’ of a vehicl?#

A. Spoilers at the front of a vehicle
B. Spoilers at the rear of a vehicle
C. Spoilers at the sides of a vehicle
D. Spoilers at the top of a vehicle
Answer» C. Spoilers at the sides of a vehicle
3686.

Which of the following is false for an abstract machine?

A. Turing machine
B. theoretical model of computer
C. assumes a discrete time paradigm
D. all of the mentioned
Answer» E.
3687.

In the case of microarrays?

A. Often the whole organism is not sequenced
B. Changes in transcript level can be studied in response to environmental changes
C. RNA is synthesized only after the property which is to be studied is inculcated
D. DNA is synthesized for this RNA by transciptase
Answer» C. RNA is synthesized only after the property which is to be studied is inculcated
3688.

What is the formula for window clearance of the transformer?

A. window clearance = (height of the window + axial depth)/2
B. window clearance = (height of the window – axial depth)
C. window clearance = (height of the window – axial depth)/2
D. window clearance = (height of the window + axial depth)
Answer» D. window clearance = (height of the window + axial depth)
3689.

For which of the following materials CO2 laser is not used?

A. Plastics
B. Metals
C. Organic materials
D. Ceramics
Answer» C. Organic materials
3690.

Which of the following materials is the better choice for making conductors in cells used to produce pSi by electrochemical etching?

A. Nickel
B. Gold
C. Copper
D. Vanadium
Answer» C. Copper
3691.

Find the value of corrected length for rectangular fin?

A.
B. L <sub>C </sub>= L + b t/2 (b + t)
C. L <sub>C </sub>= L + b t/ (b + t)
Answer» B. L <sub>C </sub>= L + b t/2 (b + t)
3692.

Covalent solids have ____ width dislocations?

A. Wide
B. Narrow
C. Moderate
D. Very narrow
Answer» E.
3693.

Which of the following are tru?

A. In the AES key expansion algorithm, the function g() operates on w i+3
B. Perform a one-byte right circular rotation on the argument 4-byte word
C. The round constant follows the formula RC[j] = RC[j ‚àí 1]
Answer» D.
3694.

What is nature of input in activation dynamics?

A. static
B. dynamic
C. both static & dynamic
D. none of the mentioned
Answer» B. dynamic
3695.

The resistance Rt of a metallic conductor at any temperature t is given by __________?

A. Rt = Ro(1+…ët)
B. Rt = Ro(1-…ët)
C. Rt = Ro(…ët-1)
D. Rt = Ro(10+…ët)
Answer» B. Rt = Ro(1-‚Äö√Ѭ∂‚àö¬¥t)
3696.

When is the tearDown() method called in JUnit?

A. After all the tests have run
B. At the beginning of every test case
C. After each test case has run
D. At the beginning of the first test case
Answer» B. At the beginning of every test case
3697.

Pulley in a belt drive acts a?

A. cylindrical pair
B. turning pair
C. rolling pair
D. sliding pair
Answer» D. sliding pair
3698.

SYNC flooding attack belongs to a type of security attack known as __________?

A. SYNC flooding attack
B. Active attack
C. Passive attack
D. Denial-of-service attack
Answer» E.
3699.

Which histone molecule produces novel binding sites for protein components of the kinetochore?

A. CENP – A
B. H2A
C. H3
D. H4
Answer» B. H2A
3700.

Which of the following is retained in the C complex of splicosome?

A. U5
B. U4
C. U2AF
D. U1
Answer» B. U4