Explore topic-wise MCQs in Aircraft Design.

This section includes 15 Mcqs, each offering curated multiple-choice questions to sharpen your Aircraft Design knowledge and support exam preparation. Choose a topic below to get started.

1.

Determine the value of sink rate of glider which is operating with 4.2 of glide angle and has speed of 120m/s.

A. 8.78m/s
B. 9.8ms
C. 56.5ms
D. 8.7ms
Answer» B. 9.8ms
2.

A glider has aspect ratio of 20 and CD0 of 0.02. In order to attain maximum range, determine the value required aerodynamic efficiency. Take e as 1.

A. 28.02
B. 20
C. 30
D. 43
Answer» B. 20
3.

Sink rate can be used to ____________

A. determine the time a glider may remain in the air
B. determine and estimate takeoff gross weight
C. estimate only wing loading
D. calculate weight to thrust ratio
Answer» B. determine and estimate takeoff gross weight
4.

If a sailplane has glide ratio of 45 then, find horizontal distance travelled by this sailplane. Consider altitude loss of 1000ft.

A. 45000ft
B. 1000ft
C. 3456ft
D. 987ft
Answer» B. 1000ft
5.

All the gliders are unpowered.

A. True
B. False
Answer» B. False
6.

If my glider has lift coefficient at maximum lift to drag as 1.5 and induced drag factor K is 0.007 then, find parasite drag coefficient.

A. 0.01575
B. 0.01 N
C. 0.02N
D. 0.0157N
Answer» B. 0.01 N
7.

Which of the following is correct for a typical glider?

A. Drag D = W*cos (gamma)
B. Drag D = W*arcsine (gamma)
C. Drag D = W
D. Drag D = Thrust T
Answer» B. Drag D = W*arcsine (gamma)
8.

If a glider needs to be flown at maximum range then, at which value of CL we should fly this glider? Consider CD0/K is 2.8.

A. 1.67
B. 3.2
C. 5.6
D. 2.5
Answer» B. 3.2
9.

Find the velocity required for maximum range. Consider a sailplane has wing loading of 110N/m2 and K/CD0 of 0.35.

A. 10.3m/s
B. 10.3mph
C. 12.5mph
D. 9.2mph
Answer» B. 10.3mph
10.

Typically, a high performance unpowered aircraft is called ________

A. sailplane
B. glider
C. jet
D. twin engine
Answer» B. glider
11.

Glider with glide angle of 4.2 is gliding with gliding ratio of _____

A. 13.6
B. 12.9
C. 15
D. 25.4
Answer» B. 12.9
12.

A typical glider has weight of 150N and has glide angle of 2.5 . Find Lift produced by the glider.

A. 149.85N
B. 150kN
C. 322N
D. 120Kn
Answer» B. 150kN
13.

If aerodynamic efficiency of the glider is 20 then, found the value of corresponding glide angle.

A. 2.86 unit
B. 3.8
C. 5.6
D. 12.12
Answer» B. 3.8
14.

The tangent of glide angle is ________

A. equal to drag to lift ratio
B. lift to drag ratio
C. inverse of thrust
D. equal to thrust
Answer» B. lift to drag ratio
15.

For a typical gliding flight, thrust will be ________

A. zero
B. equal to the lift
C. always same as drag
D. always same as weight
Answer» B. equal to the lift