MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 13 Mcqs, each offering curated multiple-choice questions to sharpen your Engineering Metrology knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
What is the width of feeler gauge blades (in mm) at heel and tip respectively? |
| A. | 12, 6 |
| B. | 5, 11 |
| C. | 20, 15 |
| D. | 15, 25 |
| Answer» B. 5, 11 | |
| 2. |
Which of the following option is correct for given statements?Statement 1: The series of feeler gauge blades are of thicknesses from 0.03 to 1 mm.Statement 2: Feeler gauge blades are non-removable and are assembled in a protective sheath. |
| A. | T, F |
| B. | F, T |
| C. | T, T |
| D. | F, F |
| Answer» B. F, T | |
| 3. |
According to BIS, What is the thickness of feeler gauge blades for set number 1? |
| A. | 0.3 to 0.1 |
| B. | 0.03 to 0.1 |
| C. | 0.05 to 0.3 |
| D. | 0.5 to 0.3 |
| Answer» C. 0.05 to 0.3 | |
| 4. |
Match the set number with number of blades in the set as per BIS. |
| A. | A-2, B-3, C-4, D-1 |
| B. | A-1, B-2, C-3, D-4 |
| C. | A-3, B-4, C-1, D-2 |
| D. | A-4, B-1, C-2, D-3View Answer |
| Answer» B. A-1, B-2, C-3, D-4 | |
| 5. |
Which if the following option is correct for given statements?Statement 1: Feeler gauge can be used to check clearance between cylinder and piston.Statement 2: The working of feeler gauges is completely depended on the sense of feel. |
| A. | Statement 1 is true but statement 2 is not true |
| B. | Statement 2 is true but statement 1 is not true |
| C. | Both the statements are not true |
| D. | Both the statements are true |
| Answer» E. | |
| 6. |
ACCORDING_TO_BIS,_WHAT_IS_THE_THICKNESS_OF_FEELER_GAUGE_BLADES_FOR_SET_NUMBER_1??$ |
| A. | 0.3 to 0.1 |
| B. | 0.03 to 0.1 |
| C. | 0.05 to 0.3 |
| D. | 0.5 to 0.3 |
| Answer» B. 0.03 to 0.1 | |
| 7. |
Which_of_the_following_option_is_correct_for_given_statements?$ |
| A. | |
| B. | |
| Answer» B. | |
| 8. |
What is the maximum variation in thickness of a feeler gauge blade of 0.3 mm thick blade? |
| A. | 0.04 |
| B. | 0.05 |
| C. | 0.06 |
| D. | 0.07 |
| Answer» C. 0.06 | |
| 9. |
A-2, B-3, C-4, D-1 |
| A. | A-1, B-2, C-3, D-4 |
| B. | A-3, B-4, C-1, D-2 |
| C. | A-4, B-1, C-2, D-3 |
| Answer» B. A-3, B-4, C-1, D-2 | |
| 10. |
How much overall length is available for feeler gauge blades? |
| A. | 50 mm |
| B. | 30 mm |
| C. | 70 mm |
| D. | 100 mm |
| Answer» E. | |
| 11. |
Which of the following is incorrect about feeler gauge? |
| A. | Feeler gauge can be used to check spark plug gaps |
| B. | A Feeler gauge has number of blades of equal thickness |
| C. | Blades are hinged in a sheath |
| D. | Each thin blade is inter-leaved between two thick blades |
| Answer» C. Blades are hinged in a sheath | |
| 12. |
What is the tensile strength of blade of feeler gauge with thickness up to 0.5 mm? |
| A. | 170 kgf/mm<sup>2</sup> |
| B. | 270 kgf/mm<sup>2</sup> |
| C. | 50 kgf/mm<sup>2</sup> |
| D. | 70 kgf/mm<sup>2</sup> |
| Answer» B. 270 kgf/mm<sup>2</sup> | |
| 13. |
What is the use of feeler gauge? |
| A. | To find the thickness of work piece |
| B. | To measure the gap width |
| C. | To check straightness |
| D. | To check flatness |
| Answer» C. To check straightness | |