MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 2460 Mcqs, each offering curated multiple-choice questions to sharpen your Advanced Machining knowledge and support exam preparation. Choose a topic below to get started.
| 2051. |
What is the relationship between the diameter and number of poles? |
| A. | diameter is directly proportional to the number of poles |
| B. | diameter is indirectly proportional to the number of poles |
| C. | diameter is directly proportional to the square of the number of poles |
| D. | diameter is indirectly proportional to the square of the number of poles |
| Answer» B. diameter is indirectly proportional to the number of poles | |
| 2052. |
RSF1010 specifies resistance to how many antimicrobial agents? |
| A. | 1 |
| B. | 2 |
| C. | 3 |
| D. | 4 |
| Answer» C. 3 | |
| 2053. |
Finds the index of the first occurrence of a number in a linked list |
| A. | Finds the index of the last occurrence of a number in a linked list |
| B. | Checks if a number is present in a linked list |
| C. | None of the mentioned |
| Answer» C. None of the mentioned | |
| 2054. |
Sedimentation analysis is generally applicable to liquid dispersions containing _______________ % solids. |
| A. | 5-10 |
| B. | 1-3 |
| C. | 2-5 |
| D. | 4-8 |
| Answer» D. 4-8 | |
| 2055. |
What is hebb’s rule of learning$ |
| A. | the system learns from its past mistakes |
| B. | the system recalls previous reference inputs & respective ideal outputs |
| C. | the strength of neural connection get modified accordingly |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 2056. |
The devices that work the best with contact management. |
| A. | Palm OS |
| B. | Pocket PC |
| C. | Plot PC |
| D. | Drives |
| Answer» B. Pocket PC | |
| 2057. |
Statement 1: Froude number relates the gravitational effect which is important when the liquid is agitated by an impeller. |
| A. | |
| B. | True, False |
| C. | True, True |
| Answer» C. True, True | |
| 2058. |
For computer simulation, considerations were defined by |
| A. | Richardson and Coulson |
| B. | Robinson and Gilliland |
| C. | Murphree and Fenske |
| D. | Johnson and Morgan |
| Answer» E. | |
| 2059. |
Spring Batch excels in the robustness it surfaces as simple configuration options for the edge and failure cases. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 2060. |
The primary current in a C.T. is _________ |
| A. | independent of secondary circuit |
| B. | dependent on the secondary circuit |
| C. | depends on the transformation ratio |
| D. | depends on the nominal ratio |
| Answer» B. dependent on the secondary circuit | |
| 2061. |
Which of the following is/are false for RAW mode of FOR XML? |
| A. | XMLSCHEMA option does not returns an in-line XSD schema |
| B. | BINARY BASE32 returns the binary data in base32-encoded format |
| C. | Each row in the query result is transformed into an XML element |
| D. | None of the mentioned |
| Answer» E. | |
| 2062. |
Which type of rivet is used for applications like air-craft? |
| A. | Counter sunk rivet |
| B. | Blind rivet |
| C. | Explosive rivet |
| D. | Flat rivet |
| Answer» B. Blind rivet | |
| 2063. |
The maximum length of arc of contact for two mating gears, in order to avoid interference, is |
| A. | (r + R) sin φ |
| B. | (r + R) cos φ |
| C. | (r + R) tan φ |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 2064. |
Water purity is tested by ____________ |
| A. | Water activity sensor |
| B. | pH meter |
| C. | SAW sensor |
| D. | BAW sensor |
| Answer» C. SAW sensor | |
| 2065. |
Which of the following chemical is responsible for London smog episode? |
| A. | Sulphur dioxide |
| B. | Sulphur |
| C. | Sulphur trioxide |
| D. | Sulphur oxide |
| Answer» B. Sulphur | |
| 2066. |
There are primarily two modes for an inference engine: forward chaining and backward chaining. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 2067. |
Assume a 275 kV transmission line having the following line constants:A = 0.8∠5° ; B = 200∠75°$ |
| A. | |
| B. | 124 MW |
| C. | 117.2 MW |
| Answer» B. 124 MW | |
| 2068. |
________ is an impure limestone. |
| A. | Sandstone |
| B. | Slate |
| C. | Laterite |
| D. | Karkar |
| Answer» E. | |
| 2069. |
The velocity and phase constant relation is given by |
| A. | V = ω/β |
| B. | V = ωβ |
| C. | V = β/ω |
| D. | Vωβ = 1 |
| Answer» B. V = ‚âà√¨‚àö¬¢‚âà√≠‚Äö√¢¬ß | |
| 2070. |
Pores produced by metal assisted etching feature _____ structure. |
| A. | square-like |
| B. | cylindrical |
| C. | cone-like |
| D. | needle-like |
| Answer» D. needle-like | |
| 2071. |
Does publish() method accepts arbitrary arguments. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 2072. |
In which phase of operation does the STA and AS prove their identities to each other? |
| A. | Discovery |
| B. | Authentication |
| C. | Key generation and distribution |
| D. | Protected data transfer |
| Answer» C. Key generation and distribution | |
| 2073. |
The maximum allowable settlement for warehouses are_________ |
| A. | 25 |
| B. | 38 |
| C. | 50 |
| D. | Less than 0.5 |
| Answer» D. Less than 0.5 | |
| 2074. |
Which of the following can also be termed as center drill? |
| A. | general drill |
| B. | short drill |
| C. | long drill |
| D. | none of the mentioned |
| Answer» C. long drill | |
| 2075. |
The clear space between the two tyres of the dual wheels should be. |
| A. | 20 mm |
| B. | 25 mm |
| C. | 27.5 mm |
| D. | 30 mm |
| Answer» E. | |
| 2076. |
Eliminating duplication ensures that code is written that’s not only testable but also$ |
| A. | |
| B. | Erasable |
| C. | Maintainable |
| Answer» C. Maintainable | |
| 2077. |
Whisper shout is used to avoid garble in TCAS. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 2078. |
The two opposite motion that comprise a single reciprocation is called _________ |
| A. | Turbocharger |
| B. | Stokes |
| C. | Fluid motion |
| D. | Auto motion |
| Answer» B. Stokes | |
| 2079. |
Push down automata accepts _________ languages. |
| A. | Type 3 |
| B. | Type 2 |
| C. | Type 1 |
| D. | Type 0 |
| Answer» C. Type 1 | |
| 2080. |
The net rate at which the radiation leaves the surface is given by |
| A. | e (E <sub>b </sub>–<sub> </sub>J)/1 – 4 e |
| B. | e (E <sub>b </sub>–<sub> </sub>J)/1 – 3 e |
| C. | e (E <sub>b </sub>–<sub> </sub>J)/1 – 2 e |
| D. | e (E <sub>b </sub>–<sub> </sub>J)/1 – e |
| Answer» E. | |
| 2081. |
The standard TTL gates are marketed as _______ series. |
| A. | 80 |
| B. | 82 |
| C. | 74 |
| D. | 08 |
| Answer» D. 08 | |
| 2082. |
Which is the only representative of artiodactyls mammals Porcula? |
| A. | Pygmy hog |
| B. | Red river hog |
| C. | Giant forest hog |
| D. | Bearded hog |
| Answer» B. Red river hog | |
| 2083. |
_____ were breached during the Hitler’s regime.$ |
| A. | Canons |
| B. | Canon |
| C. | Cannon |
| D. | Cannons |
| Answer» B. Canon | |
| 2084. |
What is the thickened concentration of the thickened sludge from the rotating biological contractor? |
| A. | 1-2% |
| B. | 3-5% |
| C. | 5-7% |
| D. | 7-9 % |
| Answer» C. 5-7% | |
| 2085. |
MVC framework includes |
| A. | Observer pattern |
| B. | Strategy pattern |
| C. | Composite pattern |
| D. | All of the mentioned |
| Answer» E. | |
| 2086. |
If the Hessian matrix of a function is zero then the critical point is |
| A. | It cannot be concluded |
| B. | Always at Origin |
| C. | Depends on Function |
| D. | (100,100) |
| Answer» B. Always at Origin | |
| 2087. |
Selection of candidate requirements can be made by which parties ? |
| A. | Stakeholders |
| B. | Designers |
| C. | Testers |
| D. | Stakeholders & Designers |
| Answer» E. | |
| 2088. |
Determine the flow rate of water, if the catchment area of hydroelectric power is 2500 km2, with an average rainfall of 160cm. the percolation and evaporation losses account for 19%.? |
| A. | 9639.8M3/s |
| B. | 42.8M3/s |
| C. | 859.63M3/s |
| D. | 2342M3/s |
| Answer» B. 42.8M3/s | |
| 2089. |
The _________ is the most effective process of repairing concrete work which has been damaged due to enquiry work or other reasons. |
| A. | Grouting |
| B. | Guniting |
| C. | Vibrating |
| D. | Pouring |
| Answer» C. Vibrating | |
| 2090. |
Which has low delay sensitivity to load? |
| A. | CMOS |
| B. | bipolar |
| C. | GaAs |
| D. | CMOS and GaAs |
| Answer» C. GaAs | |
| 2091. |
Miscellaneous alkylations, includes bonding to what? |
| A. | Sulphur |
| B. | Lithium |
| C. | Germanium |
| D. | All of the mentioned |
| Answer» E. | |
| 2092. |
Which of the below is used to make a line of sight horizontally in a level? |
| A. | Foot screws |
| B. | Levelling head |
| C. | Telescope |
| D. | Tangent screws |
| Answer» B. Levelling head | |
| 2093. |
Which one is the excess reactant? |
| A. | CH<sub>4</sub> |
| B. | O<sub>2</sub> |
| C. | Both CH<sub>4</sub> and O<sub>2</sub> |
| D. | Neither CH<sub>4</sub> nor O<sub>2</sub> |
| Answer» B. O<sub>2</sub> | |
| 2094. |
Which pins are used for additional DMA control? |
| A. | RXRDY |
| B. | RD |
| C. | MR |
| D. | INR |
| Answer» B. RD | |
| 2095. |
Fine powders that have flow characteristics, when agitated tend to ________ |
| A. | Settle |
| B. | Float |
| C. | Sink |
| D. | Absorb |
| Answer» B. Float | |
| 2096. |
State whether following statement is true or false regarding wear in EDM. |
| A. | |
| B. | True |
| Answer» C. | |
| 2097. |
These kinds of brakes require little maintenance. |
| A. | Yes |
| B. | No |
| C. | Very much maintenance is required |
| D. | Depends on the working environment |
| Answer» B. No | |
| 2098. |
Which of the following describes the complete route by which electrons flow H2O to NADP+? |
| A. | Z scheme |
| B. | A scheme |
| C. | B scheme |
| D. | X scheme |
| Answer» B. A scheme | |
| 2099. |
The resonance frequency of an amplifier is 7MHz and it is having a bandwidth of 10KHz. What is its Q factor? |
| A. | 7000 |
| B. | 70 |
| C. | 700 |
| D. | 7 |
| Answer» D. 7 | |
| 2100. |
The horizontal platform in between any two flights of a staircase is called ___ |
| A. | Landing |
| B. | Balustrade |
| C. | Nosing |
| D. | Stringer |
| Answer» B. Balustrade | |