Explore topic-wise MCQs in Electrical Engineering.

This section includes 159 Mcqs, each offering curated multiple-choice questions to sharpen your Electrical Engineering knowledge and support exam preparation. Choose a topic below to get started.

101.

Which of the following is an advantage of static capacitor for power factor improvement ?$?

A. Little maintenance cost
B. Ease in installation
C. Low losses
D. All of the above
Answer» E.
102.

_______ is invariably used as base load plant.$?

A. Diesel engine plant
B. Nuclear power plant
C. Gas turbine plant
D. Pumped storage plant
Answer» C. Gas turbine plant
103.

Annual depreciation as per straight line method, is calculated by

A. the capital cost divided by number of year of life
B. the capital cost minus the salvage value, is divided by the number of years of life
C. increasing a uniform sum of money per annum at stipulated rate of interest
D. none of the above
Answer» C. increasing a uniform sum of money per annum at stipulated rate of interest
104.

Static capacitors are rated in terms of

A. kW
B. kWh
C. kVAR
D. none of the above
Answer» D. none of the above
105.

In a power plant if the maximum demand on the plant is equal to the plant capacity, then

A. Plant reserve capacity will be zero
B. Diversity factor will be unity
C. Load factor will be unity
D. Load factor will be nearly 60%
Answer» B. Diversity factor will be unity
106.

The load factor of domestic load is usually

A. 10 to 15%
B. 30 to 40%
C. 50 to 60%
D. 60 to 70%
Answer» B. 30 to 40%
107.

Incase of ______ fuel transportation is the major problem.

A. diesel power plants
B. nuclear power plants
C. hydro-electric power plants
D. thermal power plants
Answer» E.
108.

Annual depreciation of the plant it proportional to the earning capacity of the plant vide

A. sinking fund depreciation
B. straight line depreciation
C. reducing balances depreciation
D. none of the above
Answer» D. none of the above
109.

The expected useful life of an hydroelectric power station is around

A. 15 years
B. 30 years
C. 60 years
D. 100 years
Answer» E.
110.

Load curve is useful in deciding the

A. operating schedule of generating units
B. sizes of generating units
C. total installed capacity of the plant
D. all of the above
Answer» E.
111.

Diversity factor has direct effect on the

A. fixed cost of unit generated
B. running cost of unit generated
C. both (A) and (B)
D. neither (A) nor (B)
Answer» B. running cost of unit generated
112.

Which of the following source of power is least reliable ?

A. Solar energy
B. Geothermal power
C. Wind power
D. MHD
Answer» D. MHD
113.

A synchronous condenser is virtually which of the following?

A. Induction motor
B. Under excited synchronous motor
C. Over excited synchronous motor
D. D.C. generator
Answer» D. D.C. generator
114.

Most efficient plants are normally used as

A. peak load plants
B. base load plants
C. either (A) or (B)
D. none of the above
Answer» C. either (A) or (B)
115.

For any type of consumer the ideal tariff is

A. two part tariff
B. three part tariff
C. block rate tariff
D. any of the above
Answer» C. block rate tariff
116.

Which of the following is the essential requirement of peak load plant?

A. It should run at high speed
B. It should produce high voltage
C. It should be small in size
D. It should be capable of starting quickly
Answer» E.
117.

In a load curve the highest point represents

A. peak demand
B. average demand
C. diversified demand
D. none of the above
Answer» B. average demand
118.

Depreciation charges are high in case of

A. thermal plant
B. diesel plant
C. hydroelectric plant
D. none of the above
Answer» B. diesel plant
119.

High load factor indicates

A. cost of generation per unit power is increased
B. total plant capacity is utilised for most of the time
C. total plant capacity is not properly utilised for most of the time
D. none of the above
Answer» C. total plant capacity is not properly utilised for most of the time
120.

The connected load of a IVMIM uir consumer is around

A. 5 kW
B. 40 kV
C. 80 kW
D. 120 kW
Answer» B. 40 kV
121.

Which of the following is not necessarily an advantage of interconnecting various power stations?

A. Improved frequency of power supplied
B. Reduction in total installed capacity
C. Increased reliability
D. Economy in operation of plants
Answer» B. Reduction in total installed capacity
122.

Load factor of a power station is generally

A. equal to unity
B. less than unity
C. more than unity
D. equal to zero Diversity factor is always
Answer» C. more than unity
123.

With reference to a power station which of the following is not a fixed cost?

A. Fuel cost
B. Interest on capital
C. Insurance charges
D. Depreciation
Answer» B. Interest on capital
124.

For a power plant which of the following constitutes running cost?

A. Cost of wages
B. Cost of fuel
C. Cost of lubricants
D. All of the above
Answer» E.
125.

Which of the following place is not associated with nuclear power plants in India ?

A. Narora
B. Tarapur
C. Kota
D. Benglore
Answer» E.
126.

Power plant having maximum demand more than the installed rated capacity will have utilisation factor

A. equal to unity
B. less than unity
C. more than unity
D. none of the above
Answer» D. none of the above
127.

Which of the following power plants need the least period for installation ?

A. Thermal power plant
B. Diesel power plant
C. Nuclear power plant
D. Hydro-electric power plant
Answer» C. Nuclear power plant
128.

A pilot exciter is provided on generators for which of the following reasons ?

A. To excite the poles of main exciter
B. To provide requisite starting torque to main exciter
C. To provide requisite starting torque to generator
D. None of the above
Answer» B. To provide requisite starting torque to main exciter
129.

Generators for peak load plants are usually designed for maximum efficiency at

A. 25 to 50 percent full load
B. 50 to 75 percent full load
C. full load
D. 25 percent overload
Answer» C. full load
130.

For high value of diversity factor, a power station of given installed capacity will be in a position to supply

A. Less number of consumers
B. More number of consumers
C. Neither (A) nor (B)
D. Either (A) or (B)
Answer» C. Neither (A) nor (B)
131.

Which of the following are not repayable after a stipulated period ?

A. Shares
B. Fixed deposits
C. Cash certificates
D. Bonds
Answer» B. Fixed deposits
132.

A power transformer is usually rated in

A. kW
B. kVAR
C. kWh
D. kVA
Answer» E.
133.

Which of the following equipment provides fluctuating load?

A. Exhaust fan
B. Lathe machine
C. Welding transformer
D. All of the above
Answer» D. All of the above
134.

Which of the following is not a source of power ?

A. Thermocouple
B. Photovoltaic cell
C. Solar cell
D. Photoelectric cell
Answer» B. Photovoltaic cell
135.

Air will not be the working substance in which of the following ?

A. Closed cycle gas turbine
B. Open cycle gas turbine
C. Diesel engine
D. Petrol engine
Answer» B. Open cycle gas turbine
136.

Following power plant has instant starting

A. nuclear power plant
B. hydro power plant
C. diesel power plant
D. both (B) and (C)
E. none of the above
Answer» E. none of the above
137.

The increased load during summer months is due to

A. increased business activity
B. increased water supply
C. increased use of fans and air conditioners
D. none of the above
Answer» D. none of the above
138.

offers the highest electric load.

A. Television set
B. Toaster
C. Vacuum cleaner
D. Washing machine
Answer» C. Vacuum cleaner
139.

In power plants insurance cover is provided for which of the following ?

A. Unskilled workers only
B. Skilled workers only
C. Equipment only
D. All of the above
Answer» E.
140.

A load curve indicates

A. average power used during the period
B. average kWh (kW) energy consumption during the period
C. either of the above
D. none of the above
Answer» C. either of the above
141.

Ships are generally powered by

A. nuclear power plants
B. hydraulic turbines
C. diesel engines
D. steam accumulators
E. none of the above
Answer» D. steam accumulators
142.

Load shedding is possible through which of the following ?

A. Switching of the loads
B. Frequency reduction
C. Voltage reduction
D. Any of the above
Answer» E.
143.

Different generating stations use following prime movers

A. Diesel engine
B. Hydraulic turbine
C. Gas turbine
D. Any of the above
Answer» E.
144.

Which of the following should be used for extinguishing electrical fires ?

A. Water
B. Carbon tetrachloride fire extinguisher
C. Foam type fire extinguisher
D. CO2 fire extinguisher
Answer» C. Foam type fire extinguisher
145.

When the demand of consumers is not met by a power plant, it will resort to which of the following ?

A. Load shedding
B. Power factor improvement at the , generators
C. Penalising high load consumers by increasing the charges for electricity
D. Efficient plant operation
Answer» B. Power factor improvement at the , generators
146.

A nuclear power plant is invariably used as a

A. peak load plant
B. base load plant
C. stand-by plant
D. spinning reserve plant
E. any of the above
Answer» C. stand-by plant
147.

_______ will offer the least load.

A. Vacuum cleaner
B. Television
C. Hair dryer
D. Electric shaver
Answer» E.
148.

Submarines for under water movement, are powered by which of the following ?

A. Steam accumulators
B. Air motors
C. Diesel engines
D. Batteries
Answer» E.
149.

Which of the following component, in a steam power plant, needs maximum maintenance attention?

A. Steam turbine
B. Condenser
C. Water treatment plant
D. Boiler
Answer» E.
150.

Which of the following is the disadvantage due to low power factor ?

A. Poor voltage regulation
B. Increased transmission losses
C. High cost of equipment for a given load
D. All of the above
Answer» E.