MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 15 Mcqs, each offering curated multiple-choice questions to sharpen your Engineering Drawing knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Which of the following cannot be drawn accurately using roll-n-draw? |
| A. | Lines |
| B. | Horizontal lines |
| C. | Parallel lines |
| D. | Continuous curves |
| Answer» E. | |
| 2. |
For what purpose the lead is sharpened to chisel point? |
| A. | To draw long thin lines with uniform thickness |
| B. | To draw long thin lines with non-uniform thickness |
| C. | For sketch works and lettering |
| D. | For drawing thick lines with non-uniform thickness |
| Answer» B. To draw long thin lines with non-uniform thickness | |
| 3. |
For what purpose the lead is sharpened to the conical point? |
| A. | To draw long thin lines with uniform thickness |
| B. | To draw long thin lines with non-uniform thickness |
| C. | For sketch works and lettering |
| D. | For drawing thick lines with non-uniform thickness |
| Answer» D. For drawing thick lines with non-uniform thickness | |
| 4. |
French curves are most importantly used to draw ______ |
| A. | Long lines |
| B. | Triangles |
| C. | Curves |
| D. | Circles |
| Answer» D. Circles | |
| 5. |
Small bow ink-pen is used to draw _______ |
| A. | Lines in ink |
| B. | Triangles in ink |
| C. | Big-circles in ink |
| D. | Small circles and arcs in ink |
| Answer» E. | |
| 6. |
Keeping one leg of the compass straight what is the maximum diameter of the circle that can be drawn? |
| A. | 100mm |
| B. | 120mm |
| C. | 300mm |
| D. | 360mm |
| Answer» C. 300mm | |
| 7. |
The stock and the blade of the T-square are joined at ______ to each other. |
| A. | 45o |
| B. | 30o |
| C. | 60o |
| D. | 90o |
| Answer» E. | |
| 8. |
As per B.I.S., size of B2 drawing board _______ |
| A. | 1000 X 1500 |
| B. | 500 X 700 |
| C. | 350 X 500 |
| D. | 700 x 1000 |
| Answer» C. 350 X 500 | |
| 9. |
For drawing arcs of radius less than 25mm, which of the following instrument is used? |
| A. | Compass |
| B. | Small bow compass |
| C. | Big bow compass |
| D. | Lengthening bar |
| Answer» C. Big bow compass | |
| 10. |
The drawing board size of B0 indicates as per B.I.S., is ___________mm. |
| A. | 1000 X 1500 |
| B. | 500 X 700 |
| C. | 350 X 500 |
| D. | 700 x 1000 |
| Answer» B. 500 X 700 | |
| 11. |
Which of the following instrument is used to draw circles with more than 150mm radius accurately? |
| A. | Compass |
| B. | Small bow compass |
| C. | Lengthening bar |
| D. | Big bow compass |
| Answer» D. Big bow compass | |
| 12. |
What does the drawing board size of B3 indicate as per B.I.S., in mm? |
| A. | 1000 X 1500 |
| B. | 500 X 700 |
| C. | 350 X 500 |
| D. | 700 x 1000 |
| Answer» D. 700 x 1000 | |
| 13. |
Which part of the drawing board guides the T-square? |
| A. | Bottom the board |
| B. | Ebony |
| C. | Working edge |
| D. | Above the board |
| Answer» C. Working edge | |
| 14. |
Where the T-square is made to slide on the drawing board? |
| A. | Bottom the board |
| B. | Ebony |
| C. | Working edge |
| D. | Above the board |
| Answer» D. Above the board | |
| 15. |
With the use of ______________ the accuracy and the quality of the drawing comes as desired. |
| A. | Costly instruments |
| B. | Advanced instruments |
| C. | Quality instruments |
| D. | Complex instruments |
| Answer» D. Complex instruments | |