Explore topic-wise MCQs in Civil Engineering Drawing.

This section includes 8 Mcqs, each offering curated multiple-choice questions to sharpen your Civil Engineering Drawing knowledge and support exam preparation. Choose a topic below to get started.

1.

Steel reinforcing bars shall be of mild steel or deformed steel of standard specifications.

A. True
B. False
Answer» B. False
Discussion
2.

For controlling the amount of water in cement regular moisture test should be carried out to maintain the required consistency.

A. True
B. False
Answer» C.
Discussion
3.

During lime concreting in foundation if kankar lime is used 0.35 cu m of kanakar lime shall be used with 20 cu m ballast and no surkhi or sand or cinder shall be added.

A. True
B. False
Answer» C.
Discussion
4.

During lime concreting in foundation the concrete shall consists of 10 cu m of brick ballast, 0.92 cu m of surkhi and 0.6 cu m of white lime in the proportion of 100:32:16 by volume.

A. True
B. False
Answer» C.
Discussion
5.

During lime concreting in foundation fine aggregate shall be of surkhi or sand or cinder as specified, and clean and free from dust, dirt, and foreign matters.

A. True
B. False
Answer» B. False
Discussion
6.

Any treasure and valuables or materials found during the excavation shall be the property of the excavator.

A. True
B. False
Answer» C.
Discussion
7.

For ideal work, plastering should be applied in three coats- the rendering or first coat of 10 mm, the _____________________ and finishing coat of 5 to 6 mm having a total minimum thickness of 20 mm.

A. scrubbing or second coat of 10 mm to 6 mm
B. floating or second coat of 10 mm to 6 mm
C. painting or second coat of 10 mm to 6 mm
D. layering or second coat of 10 mm to 6 mm
Answer» C. painting or second coat of 10 mm to 6 mm
Discussion
8.

During lime concreting in foundation coarse aggregate shall be of hard, well-burnt or over-burnt brick ballast of __________ mm gauge.

A. 80 mm
B. 10 mm
C. 40 mm
D. 3mm
Answer» D. 3mm
Discussion