MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 24 Mcqs, each offering curated multiple-choice questions to sharpen your Strength Materials knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Brass is an example of ____________ |
| A. | Creep |
| B. | Fatigue |
| C. | Toughness |
| D. | Hardness |
| Answer» D. Hardness | |
| 2. |
About 90% railway tracks laid with ___________ rails in the world. |
| A. | DH rails |
| B. | BH rails |
| C. | FF rails |
| D. | GH rails |
| Answer» D. GH rails | |
| 3. |
The width of broad gauge is ___________ |
| A. | 1.445m |
| B. | 1.676m |
| C. | 1 m |
| D. | 0.61 m |
| Answer» C. 1 m | |
| 4. |
The sheet of water flowing through a notch is called Nappe. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 5. |
Full form of TEL is _________ |
| A. | Total Emission Line |
| B. | Thermal Electro Light |
| C. | Total Energy Line |
| D. | Total Electro Light |
| Answer» D. Total Electro Light | |
| 6. |
The position between the summit and the lower reservoir is known as ___________ |
| A. | Inlet leg |
| B. | Outlet leg |
| C. | Pressure head |
| D. | Datum |
| Answer» C. Pressure head | |
| 7. |
Determine the velocity of flow in a pipe if the discharge capacity is 270 litres per second and cross sectional area is 5 cm2. |
| A. | 4.5 m/s |
| B. | 5.4 m/s |
| C. | 3.4 m/s |
| D. | 2.5 m/s |
| Answer» C. 3.4 m/s | |
| 8. |
Stiffness of the propped cantilever is _________ |
| A. | 4EI/l |
| B. | 6EI/l |
| C. | 8EI/I |
| D. | 5EI/l |
| Answer» B. 6EI/l | |
| 9. |
The upward deflection caused by the prop is _____________ |
| A. | Pl3/2EI |
| B. | Pl2/3EI |
| C. | Pl3/3EI |
| D. | Pl4/3EI |
| Answer» D. Pl4/3EI | |
| 10. |
FULL_FORM_OF_TEL_IS__________?$ |
| A. | Total Emission Line |
| B. | Thermal Electro Light |
| C. | Total Energy Line |
| D. | Total Electro Light |
| Answer» D. Total Electro Light | |
| 11. |
The width of broad gauge is ___$ |
| A. | 1.445m |
| B. | 1.676m |
| C. | 1 m |
| D. | 0.61 m |
| Answer» C. 1 m | |
| 12. |
STATEMENT: The sheet of water flowing through a notch is called Nappe.$ |
| A. | |
| B. | True |
| Answer» B. True | |
| 13. |
Brass is an example of ____ |
| A. | Creep |
| B. | Fatigue |
| C. | Toughness |
| D. | Hardness |
| Answer» D. Hardness | |
| 14. |
About 90% railway tracks laid with_____ rails in the world. |
| A. | DH rails |
| B. | BH rails |
| C. | FF rails |
| D. | GH rails |
| Answer» D. GH rails | |
| 15. |
_____ is the weakest part in railway track. |
| A. | Rail joint |
| B. | Sleepers |
| C. | Ballast |
| D. | Spikes |
| Answer» B. Sleepers | |
| 16. |
Which of the following gauge is the Indian Standard Gauge? |
| A. | Broad gauge |
| B. | Narrow gauge |
| C. | Light gauge |
| D. | Metre gauge |
| Answer» B. Narrow gauge | |
| 17. |
The position between the summit and the lower reservoir is known as __? |
| A. | Inlet leg |
| B. | Outlet leg |
| C. | Pressure head |
| D. | Datum |
| Answer» C. Pressure head | |
| 18. |
The highest point on syphon is known as ____ |
| A. | Summit |
| B. | Crown |
| C. | Limb |
| D. | Tread |
| Answer» B. Crown | |
| 19. |
Calculate the reaction at prop of cantilever, if the span of beam is 5m and load is 20 kN. |
| A. | 4.25 kN |
| B. | 5 kN |
| C. | 6.25 kN |
| D. | 8 kN |
| Answer» D. 8 kN | |
| 20. |
Determine the velocity of flow in a pipe if the discharge capacity is 270 litres per second and cross sectional area is 5 cm2. |
| A. | 4.5 m/s |
| B. | 5.4 m/s |
| C. | 3.4 m/s |
| D. | 2.5 m/s |
| Answer» C. 3.4 m/s | |
| 21. |
The ratio of A/P is ___________ |
| A. | Hydraulic radius |
| B. | Arbitrary datum |
| C. | T E L |
| D. | H G L |
| Answer» B. Arbitrary datum | |
| 22. |
The major losses of energy due to friction are calculated by using _________ |
| A. | Ingli’s formulae |
| B. | Emperical notations |
| C. | Chezy’s Equation |
| D. | Lacey’s Theory |
| Answer» D. Lacey‚Äö√Ñ√∂‚àö√ë‚àö¬•s Theory | |
| 23. |
Stiffness of the propped cantilever is ____ |
| A. | 4EI/l |
| B. | 6EI/l |
| C. | 8EI/I |
| D. | 5EI/l |
| Answer» B. 6EI/l | |
| 24. |
The upward deflection caused by the prop is _____ |
| A. | Pl<sup>3</sup>/2EI |
| B. | Pl<sup>2</sup>/3EI |
| C. | Pl<sup>3</sup>/3EI |
| D. | Pl<sup>4</sup>/3EI |
| Answer» D. Pl<sup>4</sup>/3EI | |