

MCQOPTIONS
Saved Bookmarks
This section includes 12 Mcqs, each offering curated multiple-choice questions to sharpen your Aircraft Design knowledge and support exam preparation. Choose a topic below to get started.
1. |
As a designer, we want to improve radar detectability of our aircraft. Where should we locate our warheads to achieve this goal? |
A. | Inside fuselage |
B. | Outside fuselage |
C. | Below wing |
D. | At wingtip |
Answer» B. Outside fuselage | |
2. |
RCS can be reduce by using RAM only. |
A. | True |
B. | False |
Answer» C. | |
3. |
RCS of flat surface can be reduced by _____ |
A. | providing some slope to flat surface |
B. | increasing flat side length |
C. | using twice length of the flat side |
D. | provide more rcs to flat side |
Answer» B. increasing flat side length | |
4. |
Which of the following will not affect the radar detectability of an aircraft? |
A. | Drag magnitude |
B. | Look angle |
C. | Flat surface |
D. | Stealth properties |
Answer» B. Look angle | |
5. |
Comment on radar detectability if RCS is higher. |
A. | Higher detectability |
B. | Lower detectability |
C. | Same detectability |
D. | Detectability is not dependent on rcs |
Answer» B. Lower detectability | |
6. |
RCS can be altered by _________ |
A. | altering the look angle |
B. | altering the drag force |
C. | altering the ram cruise and stall |
D. | altering the tail moment arm only |
Answer» B. altering the drag force | |
7. |
RCS is the measure of ___________ |
A. | the amount of EM energy is being returned by an object |
B. | how much weight is required |
C. | lift generated |
D. | radio cruise and stall properties |
Answer» B. how much weight is required | |
8. |
RCS stands for __________ |
A. | radar cross section |
B. | radar cone shape |
C. | radio conic shape |
D. | radio cruise and stall |
Answer» B. radar cone shape | |
9. |
A typical radar is located at 4 meter distance from an object. If radar transmits signal from that position then, signal strength S will be __________ |
A. | proportional to (1/44) |
B. | proportional to (1/46) |
C. | proportional to 4 |
D. | proportional to 1/4 |
Answer» B. proportional to (1/46) | |
10. |
Typical radar system consists of _________ |
A. | TX and Rx |
B. | Only TX |
C. | Only Rx |
D. | Does not require TX or Rx |
Answer» B. Only TX | |
11. |
Radar detection is one of the crucial consideration for military aircraft. |
A. | True |
B. | False |
Answer» B. False | |
12. |
RADAR stands for _________ |
A. | radio detection and ranging |
B. | radio defense and rigging |
C. | radio determination and ranging |
D. | radio detection and rigging |
Answer» B. radio defense and rigging | |