

MCQOPTIONS
Saved Bookmarks
This section includes 479 Mcqs, each offering curated multiple-choice questions to sharpen your Electrical Engineering knowledge and support exam preparation. Choose a topic below to get started.
401. |
Most packet switches use this principle ____________ |
A. | stop and wait |
B. | store and forward |
C. | store and wait |
D. | stop and forward |
Answer» C. store and wait | |
402. |
Terrestrial radio channels are broadly classifed into _____ groups. |
A. | 2 |
B. | 3 |
C. | 4 |
D. | 1 |
Answer» C. 4 | |
403. |
UTP is commonly used in __________ |
A. | dsl |
B. | fttp |
C. | http |
D. | none of the mentioned |
Answer» B. fttp | |
404. |
Firewalls are often configured to block ___________ |
A. | udp traffic |
B. | tcp traffic |
C. | sensitive traffic |
D. | best-effort traffic |
Answer» B. tcp traffic | |
405. |
Sniffers can be prevented by using _______________ |
A. | wired environment |
B. | wifi |
C. | ethernet lan |
D. | switched network |
Answer» E. | |
406. |
Packet sniffers involve ____________ |
A. | active receiver |
B. | passive receiver |
C. | legal receiver |
D. | partially-active receiver |
Answer» C. legal receiver | |
407. |
Which of the following is a form of DoS attack? |
A. | vulnerability attack |
B. | bandwidth flooding |
C. | connection flooding |
D. | all of the mentioned |
Answer» E. | |
408. |
The attacker using a network of compromised devices is known as _____________ |
A. | internet |
B. | botnet |
C. | telnet |
D. | d-net |
Answer» C. telnet | |
409. |
What is the max data transfer rate for optical fiber cable? |
A. | 10 mbps |
B. | 100 mbps |
C. | 1000 mbps |
D. | 10000 mbps |
Answer» E. | |
410. |
Which of the following architecture uses the CSMA/CD access method? |
A. | arc net |
B. | ethernet |
C. | router |
D. | stp server |
Answer» C. router | |
411. |
What is the central device in star topology? |
A. | stp server |
B. | hub/switch |
C. | pdc |
D. | router |
Answer» C. pdc | |
412. |
Which connector does the STP cable use? |
A. | bnc |
B. | rj-11 |
C. | rj-45 |
D. | rj-69 |
Answer» D. rj-69 | |
413. |
What is the max data transfer rate of STP cables? |
A. | 10 mbps |
B. | 100 mbps |
C. | 1000 mbps |
D. | 10000 mbps |
Answer» C. 1000 mbps | |
414. |
What is the max length of the Shielded twisted pair cable? |
A. | 100 ft |
B. | 200 ft |
C. | 100 m |
D. | 200 m |
Answer» D. 200 m | |
415. |
_____________ allows LAN users to share computer programs and data. |
A. | communication server |
B. | print server |
C. | file server |
D. | network |
Answer» D. network | |
416. |
Propagation delay depends on ___________ |
A. | packet length |
B. | transmission rate |
C. | distance between the routers |
D. | speed of the cpu |
Answer» D. speed of the cpu | |
417. |
Transmission delay does not depend on _____________ |
A. | packet length |
B. | distance between the routers |
C. | transmission rate |
D. | bandwidth of medium |
Answer» C. transmission rate | |
418. |
In TDM, slots are further divided into _________ |
A. | seconds |
B. | frames |
C. | packets |
D. | bits |
Answer» C. packets | |
419. |
The total nodal delay is given by ____________ |
A. | dnodal = dproc – dqueue + dtrans + dprop |
B. | dnodal = dproc + dtrans – dqueue |
C. | dnodal = dproc + dqueue + dtrans + dprop |
D. | dnodal = dproc + dqueue – dtrans – dprop |
Answer» D. dnodal = dproc + dqueue – dtrans – dprop | |
420. |
Multiplexing provides _________ |
A. | efficiency |
B. | privacy |
C. | anti jamming |
D. | both efficiency & privacy |
Answer» E. | |
421. |
The state when dedicated signals are idle are called __________ |
A. | death period |
B. | poison period |
C. | silent period |
D. | stop period |
Answer» D. stop period | |
422. |
Which multiplexing technique used to transmit digital signals? |
A. | fdm |
B. | tdm |
C. | wdm |
D. | fdm & wdm |
Answer» C. wdm | |
423. |
The sharing of a medium and its link by two or more devices is called _________ |
A. | fully duplexing |
B. | multiplexing |
C. | micropleixng |
D. | duplexing |
Answer» C. micropleixng | |
424. |
In TDM, slots are further divided into __________ |
A. | seconds |
B. | frames |
C. | packets |
D. | bits |
Answer» C. packets | |
425. |
WAN stands for __________ |
A. | world area network |
B. | wide area network |
C. | web area network |
D. | web access network |
Answer» C. web area network | |
426. |
_______ topology requires a multipoint connection. |
A. | star |
B. | mesh |
C. | ring |
D. | bus |
Answer» E. | |
427. |
Socket-style API for windows is called ____________ |
A. | wsock |
B. | winsock |
C. | wins |
D. | sockwi |
Answer» C. wins | |
428. |
User datagram protocol is called connectionless because _____________ |
A. | all udp packets are treated independently by transport layer |
B. | it sends data as a stream of related packets |
C. | it is received in the same order as sent order |
D. | it sends data very quickly |
Answer» B. it sends data as a stream of related packets | |
429. |
A 4 byte IP address consists of __________ |
A. | only network address |
B. | only host address |
C. | network address & host address |
D. | network address & mac address |
Answer» D. network address & mac address | |
430. |
Which of the following is a data link protocol? |
A. | ethernet |
B. | point to point protocol |
C. | hdlc |
D. | all of the mentioned |
Answer» E. | |
431. |
Automatic repeat request error management mechanism is provided by ________ |
A. | logical link control sublayer |
B. | media access control sublayer |
C. | network interface control sublayer |
D. | application access control sublayer |
Answer» B. media access control sublayer | |
432. |
CRC stands for __________ |
A. | cyclic redundancy check |
B. | code repeat check |
C. | code redundancy check |
D. | cyclic repeat check |
Answer» B. code repeat check | |
433. |
Header of a frame generally contains ______________ |
A. | synchronization bytes |
B. | addresses |
C. | frame identifier |
D. | all of the mentioned |
Answer» E. | |
434. |
Which of the following tasks is not done by data link layer? |
A. | framing |
B. | error control |
C. | flow control |
D. | channel coding |
Answer» E. | |
435. |
Which address is used to identify a process on a host by the transport layer? |
A. | physical address |
B. | logical address |
C. | port address |
D. | specific address |
Answer» D. specific address | |
436. |
A single channel is shared by multiple signals by ____________ |
A. | analog modulation |
B. | digital modulation |
C. | multiplexing |
D. | phase modulation |
Answer» D. phase modulation | |
437. |
Which address is used on the internet for employing the TCP/IP protocols? |
A. | physical address and logical address |
B. | port address |
C. | specific address |
D. | all of the mentioned |
Answer» E. | |
438. |
OSI stands for __________ |
A. | open system interconnection |
B. | operating system interface |
C. | optical service implementation |
D. | open service internet |
Answer» B. operating system interface | |
439. |
ONT is connected to splitter using _________ |
A. | high speed fibre cable |
B. | hfc |
C. | optical cable |
D. | twisted pair cable |
Answer» D. twisted pair cable | |
440. |
Home Access is provided by __________ |
A. | dsl |
B. | fttp |
C. | cable |
D. | all of the mentioned |
Answer» E. | |
441. |
StarBand provides __________ |
A. | ftth internet access |
B. | cable access |
C. | telephone access |
D. | satellite access |
Answer» E. | |
442. |
Which of the following statements is not applicable for cable internet access? |
A. | it is a shared broadcast medium |
B. | it includes hfcs |
C. | cable modem connects home pc to ethernet port |
D. | analog signal is converted to digital signal in dslam |
Answer» E. | |
443. |
HFC contains _______ |
A. | fibre cable |
B. | coaxial cable |
C. | a combination of fibre cable and coaxial cable |
D. | twisted pair cable |
Answer» D. twisted pair cable | |
444. |
Which of the following terms is not associated with DSL? |
A. | dslam |
B. | co |
C. | splitter |
D. | cmts |
Answer» E. | |
445. |
The function of DSLAM is to __________ |
A. | convert analog signals into digital signals |
B. | convert digital signals into analog signals |
C. | amplify digital signals |
D. | de-amplify digital signals |
Answer» B. convert digital signals into analog signals | |
446. |
DSL telcos provide which of the following services? |
A. | wired phone access |
B. | isp |
C. | wired phone access and isp |
D. | network routing and isp |
Answer» D. network routing and isp | |
447. |
Which of this is not a constituent of residential telephone line? |
A. | a high-speed downstream channel |
B. | a medium-speed downstream channel |
C. | a low-speed downstream channel |
D. | an ultra-high speed downstream channel |
Answer» D. an ultra-high speed downstream channel | |
448. |
Bluetooth is an example of __________ |
A. | personal area network |
B. | local area network |
C. | virtual private network |
D. | wide area network |
Answer» B. local area network | |
449. |
Communication channel is shared by all the machines on the network in ________ |
A. | broadcast network |
B. | unicast network |
C. | multicast network |
D. | anycast network |
Answer» B. unicast network | |
450. |
In computer network nodes are _________ |
A. | the computer that originates the data |
B. | the computer that routes the data |
C. | the computer that terminates the data |
D. | all of the mentioned |
Answer» E. | |