Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

In a piconet, there can be up to ________ parked nodes in the net.

A. 63
B. 127
C. 255
D. 511
Answer» D. 511
2.

An interconnected collection of piconet is called

A. scatternet
B. micronet
C. mininet
D. none of the mentioned
Answer» B. micronet
3.

Which one of the following is not used in media access control?

A. ethernet
B. digital subscriber line
C. fiber distributed data interface
D. none of the mentioned
Answer» E.
4.

Which protocol assigns IP address to the client connected in the internet?

A. DHCP
B. IP
C. RPC
D. none of the mentioned
Answer» B. IP
5.

Which one of the following is not an application layer protocol used in internet?

A. remote procedure call
B. internet relay chat
C. resource reservation protocol
D. none of the mentioned
Answer» D. none of the mentioned
6.

Internet works on

A. packet switching
B. circuit switching
C. both packet switching and circuit switching
D. none of the mentioned
Answer» B. circuit switching
7.

IPv6 addressed have a size of

A. 32 bits
B. 64 bits
C. 128 bits
D. 265 bits
Answer» D. 265 bits
8.

Which one of the following protocol is not used in internet?

A. HTTP
B. DHCP
C. DNS
D. None of the mentioned
Answer» E.
9.

ISP exchanges internet traffic between their networks by

A. internet exchange point
B. subscriber end point
C. isp end point
D. none of the mentioned
Answer» B. subscriber end point
10.

Internet access by transmitting digital data over the wires of a local telephone network is provided by

A. leased line
B. digital subscriber line
C. digital signal line
D. none of the mentioned
Answer» C. digital signal line
11.

To join the internet, the computer has to be connected to a

A. internet architecture board
B. internet society
C. internet service provider
D. none of the mentioned
Answer» D. none of the mentioned
12.

What is internet?

A. a single network
B. a vast collection of different networks
C. interconnection of local area networks
D. none of the mentioned
Answer» C. interconnection of local area networks
13.

What is WPA?

A. wi-fi protected access
B. wired protected access
C. wired process access
D. wi-fi process access
Answer» B. wired protected access
14.

What is Wired Equivalent Privacy (WEP) ?

A. security algorithm for ethernet
B. security algorithm for wireless networks
C. security algorithm for usb communication
D. none of the mentioned
Answer» C. security algorithm for usb communication
15.

Which one of the following event is not possible in wireless LAN.

A. collision detection
B. acknowledgement of data frames
C. multi-mode data transmission
D. none of the mentioned
Answer» B. acknowledgement of data frames
16.

Mostly ________ is used in wireless LAN.

A. time division multiplexing
B. orthogonal frequency division multiplexing
C. space division multiplexing
D. none of the mentioned
Answer» C. space division multiplexing
17.

In wireless network an extended service set is a set of

A. connected basic service sets
B. all stations
C. all access points
D. none of the mentioned
Answer» B. all stations
18.

A wireless network interface controller can work in

A. infrastructure mode
B. ad-hoc mode
C. both infrastructure mode and ad-hoc mode
D. none of the mentioned
Answer» D. none of the mentioned
19.

In wireless distribution system

A. multiple access point are inter-connected with each other
B. there is no access point
C. only one access point exists
D. none of the mentioned
Answer» B. there is no access point
20.

Which multiple access technique is used by IEEE 802.11 standard for wireless LAN?

A. CDMA
B. CSMA/CA
C. ALOHA
D. None of the mentioned
Answer» C. ALOHA
21.

In wireless ad-hoc network

A. access point is not required
B. access point is must
C. nodes are not required
D. none of the mentioned
Answer» B. access point is must
22.

What is the access point (AP) in wireless LAN?

A. device that allows wireless devices to connect to a wired network
B. wireless devices itself
C. both device that allows wireless devices to connect to a wired network and wireless devices itself
D. none of the mentioned
Answer» B. wireless devices itself
23.

An ethernet frame that is less than the IEEE 802.3 minimum length of 64 octets is called

A. short frame
B. run frame
C. mini frame
D. man frame
Answer» C. mini frame
24.

What is interframe gap?

A. idle time between frames
B. dle time between frame bits
C. idle time between packets
D. none of the mentioned
Answer» B. dle time between frame bits
25.

The maximum size of payload field in ethernet frame is

A. 1000 bytes
B. 1200 bytes
C. 1300 bytes
D. 1500 bytes
Answer» E.
26.

High speed ethernet works on

A. coaxial cable
B. twisted pair cable
C. optical fiber
D. none of the mentioned
Answer» D. none of the mentioned
27.

A point-to-point protocol over ethernet is a network protocol for

A. encapsulating PPP frames inside ethernet frames
B. encapsulating ehternet framse inside PPP frames
C. for security of ethernet frames
D. for security of PPP frames
Answer» B. encapsulating ehternet framse inside PPP frames
28.

Ethernet in metropolitan area network (MAN) can be used as

A. pure ethernet
B. ethernet over SDH
C. ethernet over MPLS
D. all of the mentioned
Answer» E.
29.

What is autonegotiation?

A. a procedure by which two connected devices choose common transmission parameters
B. a security algorithm
C. a routing algorithm
D. none of the mentioned
Answer» B. a security algorithm
30.

MAC address is of

A. 24 bits
B. 36 bits
C. 42 bits
D. 48 bits
Answer» E.
31.

What is stat frame delimeter (SFD) in ethernet frame?

A. 10101010
B. 10101011
C. 00000000
D. 11111111
Answer» C. 00000000
32.

Ethernet frame consists of

A. MAC address
B. IP address
C. both MAC address and IP address
D. none of the mentioned
Answer» B. IP address
33.

Choose the wrong statement

A. Nslookup is used to query a DNS server for DNS data
B. Ping is used to check connectivity
C. Pathping combines the functionality of ping with that of route
D. Ifconfig can configure TCP/IP network interface parameters
Answer» D. Ifconfig can configure TCP/IP network interface parameters
34.

This allows to check if a domain is available for registration.

A. Domain Check
B. Domain Dossier
C. Domain Lookup
D. None of the mentioned
Answer» B. Domain Dossier
35.

Which of the following is related to ipconfig in Microsoft Windows ?

A. Display all current TCP/IP network configuration values
B. Modify DHCP settings
C. Modify DNS settings
D. All of the mentioned
Answer» E.
36.

If you want to find the number of routers between a source and destination, the utility to be used is.

A. route
B. Ipconfig
C. Ifconfig
D. Traceroute
Answer» E.
37.

__________ command is used to manipulate TCP/IP routing table.

A. route
B. Ipconfig
C. Ifconfig
D. Traceroute
Answer» B. Ipconfig
38.

ICMP is used in

A. Ping
B. Traceroute
C. Ifconfig
D. Both Ping & Traceroute
Answer» E.
39.

Ping sweep is a part of

A. Traceroute
B. Nmap
C. Route
D. Ipconfig
Answer» C. Route
40.

Ping can

A. Measure round-trip time
B. Report packet loss
C. Report latency
D. All of the mentioned
Answer» C. Report latency
41.

A network management system can be divided into

A. three categories
B. five broad categories
C. seven broad categories
D. ten broad categories
Answer» C. seven broad categories
42.

MIB is a collection of groups of objects that can be managed by

A. SMTP
B. UDP
C. SNMP
D. TCP/IP
Answer» D. TCP/IP
43.

In Network Management System, maps track each piece of hardware and its connection to the

A. IP Server
B. Domain
C. Network
D. Data
Answer» D. Data
44.

Which of the following networks supports pipelining effect?

A. Circuit-switched networks
B. Message-switched networks
C. Packet-switched networks
D. None of the mentioned
Answer» D. None of the mentioned
45.

The physical connection between an end point and a switch or between two switches is

A. Transmission path
B. Virtual path
C. Virtual circuit
D. None of the mentioned
Answer» B. Virtual path
46.

Configuration management can be divided into two subsystems: reconfiguration and

A. Documentation
B. Information
C. Servers
D. Entity
Answer» B. Information
47.

Performance management, is closely related to

A. Proactive Fault Management
B. Fault management
C. Reactive Fault Management
D. None of the mentioned
Answer» C. Reactive Fault Management
48.

Complex networks today are made up of hundreds and sometimes thousands of

A. Documents
B. Components
C. Servers
D. Entities
Answer» C. Servers
49.

A firewall needs to be __________ so that it can grow with the network it protects

A. Robust
B. Expansive
C. Fast
D. Scalable
Answer» C. Fast
50.

A stateful firewall maintains a ___________ which is a list of active connections?

A. Routing table
B. Bridging table
C. State table
D. Connection table
Answer» B. Bridging table