Explore topic-wise MCQs in Technical Programming.

This section includes 1088 Mcqs, each offering curated multiple-choice questions to sharpen your Technical Programming knowledge and support exam preparation. Choose a topic below to get started.

451.

An input device that is able to interpret pencil marks on paper media is known as

A. Magnetic disk
B. Optical Mark Reader
C. Card Puncher
D. Magnetic tape
Answer» C. Card Puncher
452.

The estimation of the value of a function at a point beyond the interval in which the data lies is called known as

A. Interpolation
B. Simulation
C. Emulation
D. Extra polation
Answer» B. Simulation
453.

No computer can do anything without a

A. program
B. memory
C. chip
D. output device
Answer» B. memory
454.

If you see a diskette with a piece of foil covering its notch, it is said to be

A. write-protected
B. copy-protected
C. write-enabled
D. foil-covered
Answer» B. copy-protected
455.

Disketts and hard disks are

A. Direct access devices
B. Sequential access devices
C. Slower than magnetic tape
D. Used only in mainframe computers
Answer» B. Sequential access devices
456.

Which was the first commercial computer built by M.V. Wilkies.

A. Super computer
B. LEO
C. Mainframe
D. Micro computer
Answer» C. Mainframe
457.

Which of the following does not affect the resolution of a video display image?

A. bandwidth
B. raster scan rate
C. vertical and horizontal lines of resolution
D. screen size
Answer» E.
458.

Which of the following is a machine for reading documents that are encoded in a way that is readable by person and machine.

A. Document reader
B. Distributed system
C. Artificial intelligence
D. Document sorter
Answer» B. Distributed system
459.

Which of the following is directry controlled from a keyboard.

A. Card punch
B. Punched paper tape
C. Magnetic disk
D. Magnetic tape
Answer» B. Punched paper tape
460.

Transmission and presentation of text and graphics is called

A. Tele-text
B. Network
C. Telematique
D. Video text
Answer» E.
461.

A factor which might cause an individual to consider using a computer in criminal activities is:

A. The computers access to large sums of money
B. The speed with which the crime can be accomplished
C. EFTS (Electronic Funds Transfer System)
D. All the above
Answer» E.
462.

The two main components of the CPU is

A. Control unit and registers
B. Control unit and ALU
C. Registers and main memory
D. ALU and bus
Answer» C. Registers and main memory
463.

The light pen was developed in

A. 1942
B. 1976
C. 1950
D. 1992
Answer» D. 1992
464.

Punched cards are associated with the name

A. Leibniz
B. Jacquard
C. Hollerith
D. Pascal
Answer» D. Pascal
465.

Which functional component of a computer is responsible for the computing?

A. Input
B. Output
C. CPU
D. Memory
Answer» D. Memory
466.

The two basic types of record-access methods are:

A. sequential and random
B. sequential and indexed
C. direct and immediate
D. on-line and realtime
Answer» B. sequential and indexed
467.

Which of the following is a data communication link that connects more than two stations, nodes etc

A. Multipoint connection
B. Multipoint line
C. Multiple chain
D. Multilinked
Answer» C. Multiple chain
468.

The OCR stand for?

A. Outsized character reader
B. Optical character recognition
C. Operational character reader
D. Only character reader
Answer» C. Operational character reader
469.

A register in which of the following that holds the current instruction while it is being executed is called instruction register.

A. ALU
B. CPU
C. Memory
D. Address
Answer» C. Memory
470.

MODULA is a

A. Programming language
B. Low-level language
C. Assembly language
D. Machine language
Answer» B. Low-level language
471.

A device that stores one item of information is

A. Memory element
B. Block Compaction
C. MDR
D. Memory guard
Answer» B. Block Compaction
472.

A method for representing digital data analog signals by changing the phase of the analog carrier to represent the digital information is known as

A. PIA
B. PSK
C. PM
D. None of the above
Answer» C. PM
473.

Sending data from one place to another, by physical or electronic means is

A. E-mail
B. Internet
C. Data transmission
D. Distributed processing.
Answer» D. Distributed processing.
474.

Who invented the microprocessor?

A. Marcian E Hoff
B. Herman H Goldstein
C. Joseph Jacquard
D. All of the above
Answer» B. Herman H Goldstein
475.

Which is part of a computer system, enables human operators to communicate with the computer.

A. Console
B. Keyboard
C. Printer
D. CPU
Answer» B. Keyboard
476.

How many operations per second can perform by a modern fast mainframe digital computer.

A. 1000
B. 100,000
C. 10,00,000
D. 1,00,00,00,000
Answer» E.
477.

Memories in which any location can be reached in a fixed (and short) amount of time after specifying its address is called

A. sequential-access memory
B. random-access memory
C. secondary memory
D. mass storage
Answer» C. secondary memory
478.

Who launched IBM's First PC in 1981?

A. Dean Cline
B. C.B. Rogers Jr.
C. John F. Akers
D. David Svenson
Answer» C. John F. Akers
479.

The physical equipment made oi various metals, silicon and plastic components that make up the parts of a computer is called

A. micro
B. peripheral
C. hardware
D. disk drive
Answer» D. disk drive
480.

Conversion of an octal number 1068 to binary number is

A. 11100102
B. 10001102
C. 11001102
D. 100001102
Answer» C. 11001102
481.

What is the number of bits needed for an address in a 4 K memory?

A. 16
B. 8
C. 12
D. 4
Answer» D. 4
482.

A memory that contains a fine pattern of data permanently defined is

A. RAM
B. EPROM
C. ROM
D. PROM
Answer» D. PROM
483.

A storage area used to store data to compensate for the difference in speed at which the different units can handle data is

A. Memory
B. Buffer
C. Accumulator
D. Address
Answer» C. Accumulator
484.

Which part of computer performs functions similar to the cerebrums of the above cardiac and nervous system of a human body.

A. ALU
B. Input device
C. CPU
D. Control unit
Answer» D. Control unit
485.

In computer terminology a compiler means

A. a person who computes source programs
B. the same thing as a programmer
C. key punch operator
D. a program which translates source program into object program
Answer» E.
486.

In digital computer, all the expressions are coded into

A. Octal digits
B. Binary digits
C. Hexadecimal digits
D. Decimal cligits
Answer» C. Hexadecimal digits
487.

The CPU is made up of control unit ALU and

A. Memory
B. Input-Output
C. Register unit
D. All of the above
Answer» B. Input-Output
488.

A notation for defining the form and structure of data is known as

A. Data description language
B. Binary language
C. Data channel
D. Data definition language
Answer» E.
489.

Which language has been selected as the basis for the Japanese "fifth generation" computers.

A. ALGOL
B. COBOL
C. PROLOG
D. None of the above
Answer» D. None of the above
490.

In which of the following terminals the screen is regarded as an array of pixels, where each pixel is either on or off?

A. Character map terminal
B. Bit map terminal
C. RS-232 C terminal
D. All of the above
Answer» C. RS-232 C terminal
491.

Control of computer system or subsystem operation by an operator who may intervene at arbitrary times is

A. Manual control
B. Mapping
C. Shift register
D. ALU
Answer» B. Mapping
492.

The data bus in 8080A/8085 microprocessor is a group of

A. eight bidirectional lines that are used to transfer 8 bits between the microprocessor and its I/O and memory
B. sixteen bidirectional lines that are used for data transfer between the microprocessor and memory
C. eight unidirectional lines that are used for I/O devices
D. eight lines used to transfer data among the registers
Answer» B. sixteen bidirectional lines that are used for data transfer between the microprocessor and memory
493.

A file that includes an index directory to facilitate random access is

A. Sequential file
B. Indexed file
C. Random file
D. Serial file
Answer» C. Random file
494.

A computer performs operations by comparing data items and then, depending on the results, follows predetermined course of action. What are such operations called?

A. Sequential
B. Logical
C. Digital
D. Physical
Answer» C. Digital
495.

An output device that converts data from a binary format in main storage to coded hole patterns punched into a paper tape is

A. Paper tape punch
B. Punched paper tape
C. Magnetic disk
D. Magnetic tape.
Answer» B. Punched paper tape
496.

A device that can accept data, hold them&deliver them on demand at a later time is known as

A. Buffer
B. Memory
C. CPU
D. Register
Answer» C. CPU
497.

Which of the following is not used as secondary storage

A. Semiconductor memory
B. Magnetic disks
C. Magnetic drums
D. Magnetic tapes
Answer» B. Magnetic disks
498.

Data systems for planning are often called

A. decision analysis systems
B. planning analysis systems
C. decision support systems
D. All of the above
Answer» D. All of the above
499.

The proper definition of a modern digital computer is

A. an electronic automated machine that can solve problems involving words and numbers
B. a more sophisticated and modified electronic pocket calculator
C. any machine that can perform mathematical operations
D. a machine that works on binary code
Answer» B. a more sophisticated and modified electronic pocket calculator
500.

A new technology which provides the ability to create an artificial world and have people interact with it is called

A. televirtuality
B. virtual reality
C. alternative reality
D. 3-D reality
Answer» C. alternative reality