MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Combing machine introduced processing cycle called as |
| A. | Cotton Cycle |
| B. | Combed Cotton Cycle |
| C. | Carded Cotton Cycle |
| D. | Conventional Cycle |
| Answer» C. Carded Cotton Cycle | |
| 2. |
Type of entry material of carding stage in open ended cotton yarn cycle is |
| A. | Yarn |
| B. | Lap |
| C. | Draw frame |
| D. | Drawn sliver |
| Answer» C. Draw frame | |
| 3. |
Recombing process is necessary, when material is damaged because of |
| A. | transfer |
| B. | packaging |
| C. | dyeing liquor |
| D. | all of above |
| Answer» E. | |
| 4. |
Name of machine used in drawing stage of open ended cotton yarn cycle is |
| A. | Opener |
| B. | Draw frame |
| C. | Opening end spinning frame |
| D. | Blender |
| Answer» C. Opening end spinning frame | |
| 5. |
Type of delivery material in spinning stage of combed cotton cycle is |
| A. | Drawn Lap |
| B. | Roving |
| C. | Ring-spun yarn |
| D. | Roving |
| Answer» D. Roving | |
| 6. |
In combing cycle, nipper has a/an |
| A. | alternating movement |
| B. | cylindrical movement |
| C. | centripetal force |
| D. | centrifugal force |
| Answer» B. cylindrical movement | |
| 7. |
Tandem card has |
| A. | 1 carding unit |
| B. | 2 carding units |
| C. | 3 carding units |
| D. | 4 carding units |
| Answer» C. 3 carding units | |
| 8. |
Double drawing and doubling operations are carried out through |
| A. | intersecting chain drawframes |
| B. | rotating flanges drawframe |
| C. | intersecting chain and rotating flanges drawframes |
| D. | intersecting frame and screw drawframe |
| Answer» D. intersecting frame and screw drawframe | |
| 9. |
Combing head in combing machine is made up of |
| A. | feeder table |
| B. | feeder roller |
| C. | roller cotton |
| D. | rollers |
| Answer» C. roller cotton | |
| 10. |
Type of entry material of spinning stage in open ended cotton yarn cycle is |
| A. | Draw frame |
| B. | Yarn |
| C. | Drawn sliver |
| D. | Card Sliver |
| Answer» D. Card Sliver | |
| 11. |
Type of delivery material in post-comber drawing stage of combed cotton cycle is |
| A. | Drawn Sliver |
| B. | Drawn Lap |
| C. | Lap |
| D. | Card Sliver |
| Answer» B. Drawn Lap | |
| 12. |
In finisher drawframe, its possible to carry our automatic change of cans with the |
| A. | formation of bumps |
| B. | parallelization of bumps |
| C. | both a and b |
| D. | formation of cans |
| Answer» D. formation of cans | |
| 13. |
Type of entry material in pre-comber drawing stage of combed cotton cycle is |
| A. | Lap |
| B. | Card Sliver |
| C. | Drawn Sliver |
| D. | Comb Sliver |
| Answer» C. Drawn Sliver | |
| 14. |
Upper and lower cylinders of drawing off cylinder rotate |
| A. | simultaneously |
| B. | backwards |
| C. | forwards |
| D. | alternatively |
| Answer» E. | |
| 15. |
Slivers coming out of machine shows |
| A. | regularity |
| B. | irregularity |
| C. | connection |
| D. | blending |
| Answer» C. connection | |
| 16. |
Fibrous material that comes out of drawing off cylinder is called as |
| A. | web |
| B. | tuft |
| C. | fiber |
| D. | lap |
| Answer» B. tuft | |
| 17. |
Two doubling and drawing steps are carried out inside |
| A. | 2 intersecting frames |
| B. | 3 intersecting frames |
| C. | 4 intersecting frames |
| D. | 5 intersecting frames |
| Answer» B. 3 intersecting frames | |
| 18. |
Type of entry material in opening and cleaning stage of combed cotton cycle is |
| A. | Raw cotton |
| B. | Yarn |
| C. | Lap |
| D. | Comb Sliver |
| Answer» B. Yarn | |
| 19. |
Name of machine used in combing stage of combed cotton cycle is |
| A. | Blender |
| B. | Combing machine |
| C. | Carding machine |
| D. | Opener |
| Answer» C. Carding machine | |
| 20. |
Six carding points in pre-carding unit are used for |
| A. | disentangling |
| B. | deformation |
| C. | fixing |
| D. | cleaning |
| Answer» B. deformation | |
| 21. |
Type of delivery material in carding stage of combed cotton cycle is |
| A. | Card Sliver |
| B. | Drawn Sliver |
| C. | Lap |
| D. | Comb Sliver |
| Answer» B. Drawn Sliver | |
| 22. |
Fibre condensation process is carried out on |
| A. | cylinder |
| B. | roller |
| C. | draft cylinder |
| D. | draft tank |
| Answer» D. draft tank | |
| 23. |
Name of machine/s used in opening and cleaning stage of open ended cotton yarn cycle is/are |
| A. | Bale plucker |
| B. | Opener |
| C. | Blender |
| D. | all of above |
| Answer» E. | |
| 24. |
Type of delivery material in post spinning stage of combed cotton cycle is |
| A. | Ring-spun yarn |
| B. | Yarn |
| C. | Drawn Lap |
| D. | Roving |
| Answer» C. Drawn Lap | |
| 25. |
Tandem card is used for |
| A. | fine wool carding |
| B. | average wool carding |
| C. | rough wool carding |
| D. | both a and b |
| Answer» E. | |
| 26. |
Name of machine used in roving stage of combed cotton cycle is |
| A. | Roving Can |
| B. | Roving Frame |
| C. | Spinning frame |
| D. | Spinning Can |
| Answer» C. Spinning frame | |
| 27. |
Finisher drawframe is equipped with |
| A. | leveler |
| B. | autoleveller |
| C. | finisher |
| D. | string |
| Answer» C. finisher | |
| 28. |
Compromise between umber of drawing operations and blousse generated is reached after |
| A. | 2 drawing steps |
| B. | 3 drawing steps |
| C. | 4 drawing steps |
| D. | 5 drawing steps |
| Answer» C. 4 drawing steps | |
| 29. |
Sliver comes out of machine with |
| A. | tail on head |
| B. | head on tail |
| C. | heads parallel |
| D. | tails parallel |
| Answer» B. head on tail | |
| 30. |
Feeding can take place in |
| A. | 3 ways |
| B. | 2 ways |
| C. | 4 ways |
| D. | 5 ways |
| Answer» C. 4 ways | |
| 31. |
Circular comb completes |
| A. | 100 to 150 rpm |
| B. | 150-200 rpm |
| C. | 200 to 250 rpm |
| D. | 250 to 300 rpm |
| Answer» D. 250 to 300 rpm | |
| 32. |
Principle based on airstream for parallelizing and condensing is called as |
| A. | airstream principle |
| B. | condensation principle |
| C. | parallelizing principle |
| D. | air principle |
| Answer» C. parallelizing principle | |
| 33. |
Drawback of hand combing is that it may lead to |
| A. | improper raising of fibers |
| B. | twisting |
| C. | improper removal of short fibers |
| D. | entanglement |
| Answer» D. entanglement | |
| 34. |
Direction of curls is proportional to |
| A. | number of fibers |
| B. | number of curls |
| C. | number of passages |
| D. | number of sliver |
| Answer» D. number of sliver | |
| 35. |
Name of machine used in carding stage of open ended cotton yarn cycle is |
| A. | Card |
| B. | Blender |
| C. | Opener |
| D. | Opening end spinning frame |
| Answer» B. Blender | |
| 36. |
Type of entry material of drawing stage in open ended cotton yarn cycle is |
| A. | Drawn sliver |
| B. | Card Sliver |
| C. | Lap |
| D. | Draw frame |
| Answer» C. Lap | |
| 37. |
Type of delivery material in combing stage of combed cotton cycle is |
| A. | Card Sliver |
| B. | Lap |
| C. | Comb Sliver |
| D. | Drawn Lap |
| Answer» D. Drawn Lap | |
| 38. |
Type of entry material of opening and cleaning stage in open ended cotton yarn cycle is |
| A. | Yarn |
| B. | Lap |
| C. | Raw cotton |
| D. | Card Sliver |
| Answer» D. Card Sliver | |
| 39. |
Package form of spinning stage in open ended cotton yarn cycle is |
| A. | Card Sliver |
| B. | Package |
| C. | Draw frame can |
| D. | Lap |
| Answer» C. Draw frame can | |
| 40. |
Type of delivery material of spinning stage in open ended cotton yarn cycle is |
| A. | Drawn sliver |
| B. | Card Sliver |
| C. | Yarn |
| D. | Lap |
| Answer» D. Lap | |
| 41. |
Package form of pre-comber drawing in combed cotton cycle is |
| A. | Drawn Lap |
| B. | Bobbin |
| C. | Drawn lap can |
| D. | Lap |
| Answer» D. Lap | |
| 42. |
Package form of post-spinning in combed cotton cycle is |
| A. | Skein and Bobbin |
| B. | Ring-spun yarn |
| C. | Drawn Lap |
| D. | Lap |
| Answer» B. Ring-spun yarn | |
| 43. |
Type of entry material in spinning stage of combed cotton cycle is |
| A. | Lap |
| B. | Roving |
| C. | Card Sliver |
| D. | Drawn Lap |
| Answer» C. Card Sliver | |