Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

Zeolite is used in the ____________________ ?

A. Water treatment
B. Glass manufacture
C. Hydrogenation of fatty oil as a catalyst
D. Development of exposed photographic plate
Answer» B. Glass manufacture
2.

Zeolite removes both temporary as well as permanent hardness of water by precipitating calcium and magnesium present in water as insoluble zeolites. Used zeolite is regenerated by flushing with the solution of_____________________?

A. Calcium sulphate
B. Sodium chloride
C. Sodium sulphate
D. Magnesium chloride
Answer» C. Sodium sulphate
3.

Zeolite used in water softening process (cation exchange) is regenerated by washing with___________________?

A. Brine
B. Chloramines
C. Sodium bisulphite
D. Liquid chlorines
Answer» B. Chloramines
4.

Which of the following is the most adverse factor challenging the choice of mercury electrolytic cell process for the production of caustic soda ?

A. High cost of mercury
B. High specific gravity of mercury
C. Non-availability of high purity mercury
D. Pollution of water stream by mercury
Answer» E.
5.

Which of the following is not produced on commercial scale from sea water ?

A. Bromine
B. Magnesium compounds
C. Potassium compounds
D. Sodium sulphate
Answer» E.
6.

Which of the following is not an insecticide ?

A. Hydrocyanic acid
B. Nicotine
C. Sodium fluoride
D. Hexane
Answer» E.
7.

Which of the following is not a raw material used for the manufacture of ordinary glass ?

A. Iron oxide
B. Soda ash
C. Limestone
D. Silica
Answer» B. Soda ash
8.

Which of the following is not a pyrite ore ?

A. Celestite
B. Galena
C. Gypsum
D. Siderite
Answer» E.
9.

Which of the following is not a food additive ?

A. Citric acid
B. Invertage
C. Benzoyl peroxide
D. Ammonium chloride
Answer» E.
10.

Which of the following is an organometallic compound ?

A. Isopropyl alcohol
B. Tetra-ethyl lead
C. Zeolite
D. Cumene
Answer» C. Zeolite
11.

Which of the following is a disaccharide ?

A. Sucrose
B. Glucose
C. Starch
D. Maltose
Answer» B. Glucose
12.

Which of the following is a bleaching agent added in the detergents to facilitate removal of stains caused due to blood, tea etc ?

A. Sodium silicate
B. Sodium borate
C. Sodium tripolyphosphate (STPP)
D. Caustic soda
Answer» C. Sodium tripolyphosphate (STPP)
13.

Which is the most efficient absorbent for SO3 out of the following ?

A. 20% oleum
B. 65% oleum
C. 78% H2SO4
D. 98% H2SO4
Answer» E.
14.

Which glass is usually used in optical work ?

A. Lead glass
B. High silica (borosilicate) glass
C. Photo-sensitive glass
D. Fibre glass
Answer» D. Fibre glass
15.

Which form of sulphur is the most stable at room temperature ?

A. Plastic
B. Monoclinic
C. Rhombic
D. Flowers of sulphur
Answer» D. Flowers of sulphur
16.

Wet chlorine gas produced during electrolysis of brine is dehydrated by__________________?

A. Spraying 66° Be H2SO4 counter current to the flow of the gas
B. Passing it through a bed of diatomaceous earth
C. Passing it through a bed of silica gel
D. None of these
Answer» B. Passing it through a bed of diatomaceous earth
17.

Wax is a___________________?

A. Mixture of glycerides
B. Mixture of esters of polyhydric alcohols excepting glycerine
C. Liquid at room temperature
D. Mixture of glycerides of fatty acids
Answer» C. Liquid at room temperature
18.

Washing soda is chemically represented by _________________?

A. Na2CO3
B. Na2CO3.H2O
C. Na2CO3.10H2O
D. NaHCO3
Answer» D. NaHCO3
19.

Vulcanisation of rubber____________________?

A. Decreases its tensile strength
B. Increases its ozone & oxygen reactivity
C. Increases its oil & solvent resistance
D. Converts its plasticity into elasticity
Answer» E.
20.

Viscose rayon is chemically___________________?

A. Cellulose nitrate
B. Regenerated cellulose nitrate
C. Cellulose acetate
D. Regenerated cellulose acetate
Answer» E.
21.

Viscose rayon is__________________?

A. Cellulose nitrate
B. Regenerated cellulose nitrate
C. Regenerated cellulose acetate
D. None of these
Answer» E.
22.

Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of __________________?

A. 4 kgf/cm2 & 500°C
B. 10 kgf/cm2 & 1000°C
C. 40 kg/cm2 & 200°C
D. 100 kgf/cm2 & 500°C
Answer» B. 10 kgf/cm2 & 1000°C
23.

Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is ____________ °C?

A. -5 to 0
B. 5 to 10
C. 30 to 50
D. 75 to 80
Answer» D. 75 to 80
24.

Very fine suspended and colloidal impurities are removed from water by a process called___________________?

A. Sedimentation
B. Coagulation
C. Disinfection
D. Softening
Answer» C. Disinfection
25.

Vegetable oils contain large quantity of glycerides of unsaturated acids. When the vegetable oils contain high amount of saturated fatty acids, it is termed as ____________________ oil?

A. Drying
B. Semi-drying
C. Non-drying
D. None of these
Answer» D. None of these
26.

Varnish does not contain____________________?

A. Pigment
B. Thinner
C. Dryer
D. Anti-skimming agent
Answer» B. Thinner
27.

Varnish does not contain_______________?

A. Thinner
B. Pigment
C. Both A. & B.
D. Neither A. nor B.
Answer» C. Both A. & B.
28.

Vanillin is a type of____________________?

A. Anti-pyretic drug
B. Food preservative
C. Flavour
D. Dye
Answer» D. Dye
29.

Use of water having dissolved oxygen in boilers promotes___________________?

A. Corrosion
B. Sequestration
C. Scale formation
D. None of these
Answer» B. Sequestration
30.

Use of hydrated lime in water treatment_________________?

A. Before filtration, reduces the bacterial load on filters
B. After filtration, combats the corrosiveness of water due to the presence of O2 & CO2
C. Is to adjust the pH value
D. All A , B. and C.
Answer» E.
31.

Use of chlorine in the treatment of sewage_________________?

A. Helps in grease separation
B. Increases the biological oxygen demand (BOD)
C. Causes bulking of activated sludge
D. Aids in flocculation
Answer» B. Increases the biological oxygen demand (BOD)
32.

Unsaturated oils compared to saturated oils have___________________?

A. Lower melting point & higher reactivity to oxygen
B. Higher melting point & higher reactivity to oxygen
C. Lower melting point & lower reactivity to oxygen
D. Higher melting point & lower reactivity to oxygen
Answer» B. Higher melting point & higher reactivity to oxygen
33.

Ultimate analysis of coal determines its _______________________ content?

A. Carbon, hydrogen, nitrogen & sulphur
B. Carbon, ash, sulphur & nitrogen
C. Carbon, sulphur, volatile matter & ash
D. Carbon, volatile matter, ash & moisture
Answer» D. Carbon, volatile matter, ash & moisture
34.

Type of glass used in optical work is the ___________________ glass?

A. Soda-lime
B. Fibre
C. Lead
D. Borosilicate
Answer» D. Borosilicate
35.

Triple superphosphate is manufactured by reacting ____________________?

A. Phosphate rock with phosphoric acid
B. Phosphate rock with sulphuric acid
C. Phosphate rock with nitric acid
D. Ammonium phosphate with phosphoric acid
Answer» B. Phosphate rock with sulphuric acid
36.

Trinitrotoluene (TNT), an explosive, is made by the nitration of ____________________?

A. Nitrobenzene
B. Toluene
C. Nitrotoluene
D. Benzene
Answer» C. Nitrotoluene
37.

Trinitro-toluene (TNT) is _________________ ?

A. Used in glycerine manufacture
B. An explosive
C. Used in dye manufacture
D. None of these
Answer» C. Used in dye manufacture
38.

Transportation of 35% oleum during winter suffers from the problem of freezing, which can be overcome by the addition of small quantity of_____________________?

A. Nitric acid
B. Hydrochloric acid
C. Methyl alcohol
D. Formic acid
Answer» B. Hydrochloric acid
39.

Transparent soaps (e.g. Pears) are____________________?

A. Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency
B. Metallic soaps with frothing agent and free Stearic acid to achieve transparency
C. Metallic soaps with frothing agent from which glycerine has not been recovered
D. None of these
Answer» B. Metallic soaps with frothing agent and free Stearic acid to achieve transparency
40.

Titanium dioxide is a/an ___________________ colour pigment?

A. White
B. Black
C. Yellow
D. Blue
Answer» B. Black
41.

Thorium is mainly used _______________?

A. For the manufacture of gas mantles
B. As a fissile fuel in a nuclear reactor
C. In the manufacture of hydrogen bomb
D. In the treatment of cancer
Answer» B. As a fissile fuel in a nuclear reactor
42.

Thermosetting plastic materials____________________?

A. Can be repeatedly melted
B. Is useful for melt casting
C. Cannot be melted after forming
D. Is useful for spinning
Answer» D. Is useful for spinning
43.

Thermosetting materials ______________________?

A. Are cross-linked molecules
B. Soften on application of heat
C. Are solvent soluble
D. None of these
Answer» B. Soften on application of heat
44.

Thermoplastic materials_____________________?

A. Do not soften on application of heat
B. Are heavily branched molecules
C. Are solvent insoluble
D. None of these
Answer» E.
45.

Thermal pyrolysis of ethylene dichloride produces___________________?

A. Trichloroethylene
B. Vinyl chloride
C. Ethanol amine
D. Ethylene oxide
Answer» C. Ethanol amine
46.

The yield of tar from high temperature carbonisation of dry coal is about _______________ percent?

A. 3
B. 12
C. 22
D. 0.3
Answer» B. 12
47.

The type of high refractive index glass used in optical instruments is _____________ glass?

A. Pyrex
B. Flint
C. Crookes
D. None of these
Answer» C. Crookes
48.

The terminology ‘BTX’ used in coal tar distillation industry refers to___________________?

A. Benzol-toluol-xylol
B. Benzol-toluene-xylene
C. Benzene-toluol-xylol
D. Benzene-toluene-xylene
Answer» E.
49.

The temperature in the calcium carbide furnace is _______________ °C ?

A. 200-300
B. 700-850
C. 2000-2200
D. 4000-4500
Answer» D. 4000-4500
50.

The purpose of tanning in leather industry is to____________________?

A. Stiffen the leather
B. Smoothen the leather
C. Make it flexible
D. Impart water resistance
Answer» B. Smoothen the leather