Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

Acetone is produced by catalytic dehydrogenation of

A. phenol
B. naphthalene
C. isopropanol
D. ethyl benzene
Answer» D. ethyl benzene
2.

Commercial production of Vanaspati is done by __________ of edible vegetable oils.

A. hydrogenation
B. oxidation
C. hydrolysis
D. hydrocracking
Answer» B. oxidation
3.

The difference between saponification value and acid value is

A. called ester value.
B. always negative.
C. constant for all fatty oils.
D. none of these.
Answer» B. always negative.
4.

Molasses is the starting material for the production of

A. alcohol
B. essential oil
C. fatty acids
D. massecuite
Answer» B. essential oil
5.

__________ is produced using polycondensation reaction.

A. Polythene
B. Phenol formaldehyde
C. Poly vinyl chloride
D. none of these
Answer» C. Poly vinyl chloride
6.

Salt is the basic raw material for the manufacture of

A. cement
B. glass
C. potteries
D. caustic soda
Answer» E.
7.

Coal tar is used as a

A. binding material for coal briquettes.
B. fuel in rotary kiln.
C. binder in making carbon electrodes.
D. all (a), (b) and (c).
Answer» E.
8.

Laboratory glass wares which reacts with hydroflouric acid, are made of the __________ glass.

A. lead
B. borosilicate
C. soda lime
D. alkali silicate
Answer» C. soda lime
9.

Which one of the following is not an elastomer ?

A. Polyisoperene
B. Neoprene
C. Nitrile-butadiene
D. None of these
Answer» E.
10.

The metallic aluminium is obtained from pure alumina in the presence of fused cryolite by

A. electrolysis
B. electrolytic reduction
C. electrolytic oxidation
D. none of these
Answer» C. electrolytic oxidation
11.

Heating of __________ to 120°C, produces plaster of paris.

A. blue vitriol
B. gypsum
C. calcium silicate
D. calcium sulphate
Answer» C. calcium silicate
12.

Chrome tanning and vegetable tanning are done for

A. light & heavy leather respectively.
B. heavy & light leather respectively.
C. both light & heavy leather.
D. neither light nor heavy leather.
Answer» B. heavy & light leather respectively.
13.

Which of the following is not a raw material used for the manufacture of ordinary glass?

A. Iron oxide
B. Soda ash
C. Limestone
D. Silica
Answer» B. Soda ash
14.

Which of the following is the most adverse factor challenging the choice of mercury electrolytic cell process for the production of caustic soda?

A. High cost of mercury.
B. High specific gravity of mercury.
C. Non-availability of high purity mercury.
D. Pollution of water stream by mercury.
Answer» E.
15.

Nitrogen is an essential component of

A. mineral salts
B. carbohydrates
C. fats
D. proteins
Answer» E.
16.

Polyvinyl chloride (PVC) is

A. a thermosetting material.
B. a condensation polymerisation product.
C. made by employing emulsion polymerisation.
D. none of these.
Answer» D. none of these.
17.

Calcination of gypsum produces

A. plaster of paris
B. salt cake
C. nitre cake
D. lime
Answer» B. salt cake
18.

Metallic soap (e.g. aluminium or calcium salts of fatty acids) can be used

A. as a lubricant.
B. as a rust preventive.
C. in hard water for cleaning of cloth.
D. as a foam depressant in distillation column.
Answer» B. as a rust preventive.
19.

Kaoline is a/an

A. refractory material
B. synthetic resin
C. artificial abrasive
D. blue pigment
Answer» B. synthetic resin
20.

Concentration of NaOH solution produced by mercury electrolytic cell is about __________ percent.

A. 10
B. 25
C. 50
D. 98
Answer» D. 98
21.

In the production of soda ash by Solvay process, the by-product is

A. CaCl2
B. NH4Cl
C. NH3
D. NaOH
Answer» B. NH4Cl
22.

The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is

A. alumina
B. silica gel
C. platinum
D. nickel
Answer» B. silica gel
23.

What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell ?

A. Cl2 & Na
B. Cl2 & H2
C. O2 & H2
D. Cl2, H2 & NaOH solution.
Answer» E.
24.

The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is

A. dilute H2SO4
B. oleum
C. ultraviolet light
D. none of these
Answer» C. ultraviolet light
25.

Lubricating greases are a mixture of

A. mineral oil, soap and additives.
B. mineral oil and metallic soap.
C. mineral oil and fatty oil.
D. fatty oil and metallic soap.
Answer» B. mineral oil and metallic soap.
26.

Grignard reagent is chemically known as

A. ethyl magnesium chloride.
B. methyl magnesium chloride.
C. dichlorophenol.
D. monochloro acetic acid.
Answer» B. methyl magnesium chloride.
27.

Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C.

A. 15-30
B. 90-100
C. 250-300
D. <0
Answer» B. 90-100
28.

Fat dispersed in water is exemplified by

A. colloids
B. gel
C. butter
D. emulsion
Answer» D. emulsion
29.

Producer gas consists mainly of

A. CO, CO2 N2, H2
B. CO, H2
C. H2, CH4
D. C2H2, CO2, H2
Answer» B. CO, H2
30.

Phosphate rock is a raw material for the manufacture of

A. phosphoric acid
B. phosphorous
C. superphosphates
D. all (a), (b) and (c)
Answer» E.
31.

Which of the following is the main constituent of the mother liquor produced in salt industry ?

A. Quick lime
B. Glauber's salt
C. Salt petre
D. Bromine
Answer» E.
32.

Black liquor is converted into white liquor by

A. evaporation and burning the concentrate followed by causticisation of products.
B. multi-effect evaporation only.
C. selective liquid extraction.
D. extractive distillation.
Answer» B. multi-effect evaporation only.
33.

Poly Vinyl Chloride (P.V.C.) is a __________ material.

A. thermosetting
B. thermoplastic
C. fibrous
D. chemically active
Answer» C. fibrous
34.

Which is the most suitable dye for synthetic fibres ?

A. Acid dye
B. Azoic dye
C. Pigment dye
D. Mordant dye
Answer» B. Azoic dye
35.

Esterification reaction

A. produces soap.
B. is reversible.
C. is a reaction between an alcohol and an organic acid.
D. all (a), (b) and (c).
Answer» E.
36.

Essential oils are usually obtained using

A. steam distillation
B. extractive distillation
C. solvent extraction
D. leaching
Answer» E.
37.

Viscosity index improver (like polystrene or polyisobutylene) is added to lubricant to

A. reduce its viscosity.
B. increase its viscosity.
C. reduce the variation in its viscosity with temperature.
D. increase the variation in its viscosity with temperature.
Answer» D. increase the variation in its viscosity with temperature.
38.

Neon gas is

A. flammable in nature.
B. used in color discharge tube.
C. filled in lamps having tungsten filament.
D. all (a), (b) and (c).
Answer» C. filled in lamps having tungsten filament.
39.

Oils and fats are converted to soap in a process called

A. hydrogenation
B. esterification
C. saponification
D. none of these
Answer» D. none of these
40.

__________ acid is an unsaturated fatty acid.

A. Palmitic
B. Oleic
C. Stearic
D. Oxalic
Answer» C. Stearic
41.

Chloramines are used in water treatment for

A. disinfection and control of taste & odour.
B. corrosion control.
C. removing turbidity.
D. control of bacteria.
Answer» B. corrosion control.
42.

Chemical formula of BHC, which is an insecticide is

A. C6H6Cl6
B. C6Cl6
C. C6H5Cl
D. C6H4Cl2
Answer» C. C6H5Cl
43.

Multistage catalytic converter is not used in the

A. conversion of SO2 to SO3
B. NH3 synthesis reaction.
C. both (a) & (b).
D. neither (a) nor (b).
Answer» C. both (a) & (b).
44.

Dacron is a

A. condensation product of hexam-ethylene diamine and adipic acid.
B. thermosetting material.
C. condensation product of dimethyl terephthalate and ethylene glycol.
D. none of these.
Answer» E.
45.

Neoprene is the trade name of

A. polyurathane
B. phenol formaldehyde
C. polychloroprene
D. styrene-butadiene rubber
Answer» D. styrene-butadiene rubber
46.

Epoxy resin

A. is a good adhesive.
B. is an elastomer.
C. cannot be used for surface coatings.
D. is a polyester.
Answer» B. is an elastomer.
47.

Which of the following is an organo-metal-lic compound ?

A. Isopropyl alcohol
B. Tetra-ethyl lead
C. Zeolite
D. Cumene
Answer» C. Zeolite
48.

The combustion reaction, C + O2 = CO2, is

A. exothermic
B. endothermic
C. autocatalytic
D. none of these
Answer» B. endothermic
49.

Very fine suspended and colloidal impurities are removed from water by a process called

A. sedimentation
B. coagulation
C. disinfection
D. softening
Answer» C. disinfection
50.

Main use of liquid nitrogen is in

A. rocket propulsion.
B. making gun powder.
C. detergent manufacture.
D. refrigerative cooling.
Answer» E.