Explore topic-wise MCQs in Unit Processes.

This section includes 1120 Mcqs, each offering curated multiple-choice questions to sharpen your Unit Processes knowledge and support exam preparation. Choose a topic below to get started.

901.

In Rat-trap bond masonry, course height is:

A. 110mm
B. 75mm
C. 230mm
D. 190mm
Answer» B. 75mm
902.

The higher value of compressive stress is permissible only in:

A. I sections
B. Composite sections
C. L sections
D. Prestressed sections
Answer» C. L sections
903.

Modernizr.csstransformss detects _________

A. CSS 2D transforms
B. CSS 3D transforms
C. Input Types
D. Input Attributes
Answer» B. CSS 3D transforms
904.

What is the color of the metallic lithium in liquid ammonia solution?

A. orange
B. light green
C. deep blue
D. colorless
Answer» D. colorless
905.

The frictional force is directly proportional to the ____________

A. Applied load
B. Type of surface used
C. The normal force
D. The horizontal load
Answer» D. The horizontal load
906.

Necessary condition of euler’s theorem is$

A. z should be homogeneous and of order n
B. z should not be homogeneous but of order n
C. z should be implicit
D. z should be the function of x and y only
Answer» B. z should not be homogeneous but of order n
907.

Which of the following CSS Property defines which property values to apply to the element before the animation begins (if delayed) and after it ends?

A. animation-play
B. animation-delay
C. animation-fill-mode
D. animation-play-state
Answer» D. animation-play-state
908.

Is wind tunnel test is conducted to verify the computer designed profiles?

A. True
B. False
Answer» B. False
909.

Which of the following gear is used for counting and timing purposes?

A. High speed gears
B. High power gears
C. Low speed gears
D. Precision gears
Answer» E.
910.

What is the relationship between Orificemeter diameter and pipe diameter

A. Orificemeter diameter is 0.5 times the pipe diameter
B. Orificemeter diameter is one third times the pipe diameter
C. Orificemeter diameter is one fourth times the pipe diameter
D. Orificemeter diameter is equal to the pipe diameter
Answer» D. Orificemeter diameter is equal to the pipe diameter
911.

Fuel is burnt partially in the Combustion Chamber & partially in the?

A. HRCG
B. HRSC
C. HRSG
D. Compressor
Answer» D. Compressor
912.

The value of flux involved in the emf equation of a transformer is _______________

A. average value
B. rms value
C. maximum value
D. instantaneous value
Answer» D. instantaneous value
913.

One’s complement of a number x is y, then one’s complement of y is:$

A. y
B. x
C. x + y
D. None of the mentioned
Answer» C. x + y
914.

Which of the following is true about beam column?

A. member subjected to bending moment
B. member subjected to axial force only
C. member subjected to axial force and bending moment
D. net end moments are zero
Answer» D. net end moments are zero
915.

For retaining compression in the cylinder, a flat piece of ___________ is placed between the cylinder head and cylinder block.

A. gasket
B. rims
C. cylinder liner
D. invar strut
Answer» B. rims
916.

Which of the following hammers is also called as gravity hammer?

A. Board hammer
B. Air-lift hammer
C. Power drop hammer
D. Nail hammer
Answer» B. Air-lift hammer
917.

The vessel should have the minimum number of internal structures.

A. True
B. False
Answer» B. False
918.

At high frequencies the capacitive reactance.

A. is constant
B. increases
C. decreases
D. becomes zero
Answer» D. becomes zero
919.

Secondary memory is the long term store for programs and data while main memory holds program and data currently in use. What kind of an organization is this?

A. Physical
B. Logical
C. Structural
D. Simple
Answer» B. Logical
920.

Which of the following is unknown in this method?

A. force
B. displacement
C. support reactions
D. can’t say
Answer» C. support reactions
921.

A J-K flip-flop can be obtained from the clocked S-R flip-flop by augmenting

A. Two AND gates
B. Two NAND gates
C. Two NOT gates
D. None of the Mentioned
Answer» B. Two NAND gates
922.

In Otto cycle, with increase in fuel consumption, thermal efficiency is

A. increased
B. reduced
C. remains same
D. none of the mentioned
Answer» C. remains same
923.

The value of magnetic moment is known as which of the following?

A. Thompson magneton
B. Bohr magneton
C. Goldstein magneton
D. Rutherford magneton
Answer» C. Goldstein magneton
924.

In order to facilitate the starting of locomotive in any position, the cranks of a locomotive, with two cylinders, are placed at ______________ to each other.

A. 45°
B. 90°
C. 120°
D. 180°
Answer» C. 120¬¨¬®‚Äö√†√ª
925.

Which of the following statement will import pandas?

A. import pandas as pd
B. import panda as py
C. import pandaspy as pd
D. all of the Mentioned
Answer» B. import panda as py
926.

The hard learning problem is ultimately solved by hoff’s algorithm?$

A. yes
B. no
Answer» C.
927.

By treating diazonium salts with cuprous cyanide or KCN and copper powder it forms which of the following compound?

A. Citric acid
B. Benzoic acid
C. Aryl nitrile
D. Oxalic acid
Answer» D. Oxalic acid
928.

The cross slope required for the correction of shoulder is.

A. 2%
B. 3%
C. 4%
D. 5%
Answer» E.
929.

Approaches for creating mutations can be divided into how many types?

A. 1
B. 2
C. 3
D. 4
Answer» C. 3
930.

The cost of production for the injection moulding is ___________

A. High
B. Low
C. Moderate
D. Very high
Answer» C. Moderate
931.

Which one of the following is the best way to protect environment by individuals?

A. By simply talking about environment
B. By killing organisms and cutting trees
C. By joining NGOs and involve themselves in environmental protection works
D. By simply sitting in a home
Answer» D. By simply sitting in a home
932.

________ allows only committed data to be read and further requires that no other transaction is allowed to update it between two reads of a data item by a transaction.

A. Read uncommitted
B. Serializable
C. Repeatable read
D. Read committed
Answer» D. Read committed
933.

A Contour line is a line on the map representing a contour.

A. True
B. False
Answer» B. False
934.

Pebble bed modular is reactor coupled with _________

A. helium closed cycle gas turbine
B. argon closed cycle gas turbine
C. gas cooled reactors
D. none of the mentioned
Answer» B. argon closed cycle gas turbine
935.

For critical application quartz oscillator is usually contained in container called

A. Crystal oven
B. Crystal case
C. Silicon container
D. Crystal container
Answer» B. Crystal case
936.

Which of the following style main goal is to achieve portability, modifiability with the ease of parameterization?

A. Independent component architecture
B. Layered Styles
C. Heterogeneous styles
D. None of the mentioned
Answer» C. Heterogeneous styles
937.

The slurry, in its movement down the kiln, encounters a progressively higher temperature. At first, the water is driven off and ___ is liberated.

A. SiO<sub>2</sub>
B. CO<sub>2</sub>
C. Gypsum
D. CaO
Answer» C. Gypsum
938.

Which of these is true for prototypes?

A. Horizontal Prototypes does some processing apart from the required for presenting the product’s user interface
B. Vertical Prototype realizes part or all of a product’s user interface
C. All of the mentioned
D. None of the mentioned
Answer» E.
939.

The cyclone gritter removes the grit particles based on which of the below mentioned phenomenon?

A. Centrifugal force
B. Gravity
C. Brownian motion
D. Sedimentation
Answer» B. Gravity
940.

MDB must implements interfaces:-

A. javax.ejb.MessageDrivenBean
B. javax.jms.MessageListener
C. all of the mentioned
D. none of the mentioned
Answer» D. none of the mentioned
941.

An underwater sonar source operating at a frequency of 60 kHz directs its beam towards the surface. If velocity of sound in air is 330m/s, wavelength and frequency of the waves in air are

A. 5.5mm, 60 kHz
B. 5.5mm, 30 kHz
C. 5.5mm, 30 kHz
D. 5.5mm,80 kHz
Answer» B. 5.5mm, 30 kHz
942.

The technical terms that help us in differentiating between converters are:

A. resolution
B. accuracy
C. precision
D. all of the mentioned
Answer» E.
943.

What is the shape of indentation by knoop indenter?

A. Semi spherical
B. Square
C. Cone
D. Rhombohedral
Answer» E.
944.

The point where equilibrium curve and component balance meets is called as

A. Murphree point.
B. Intersection point
C. Junction point
D. Pinch point
Answer» E.
945.

A simple fractional tube is packed with

A. Wooden beads
B. Plastic beads
C. Metal beads
D. Glass beads
Answer» E.
946.

Protein A binds to __________________

A. IgG antibodies
B. Genes
C. Proteins
D. Membrane
Answer» B. Genes
947.

If the span of crossing is greater than 12 feet (3.7 m), the structure is termed as bridge and otherwise is______________

A. drainage
B. bridges
C. culvert
D. tunnels
Answer» D. tunnels
948.

By use of the ___________ it is based on the optical illusion that areas of very small black dots appear as gray, since the eye cannot distinguish the individual dots without magnification.

A. No tone screen
B. Full tone screen
C. Half tone screen
D. Medium tone screen
Answer» D. Medium tone screen
949.

A continuous time LTI system has memory only when __________

A. It does not depend on the present value of the input
B. It only depends on the past values of the input
C. Its output always depends both on the previous and past values of the input
D. Its output might depend on the present value as well as the previous value of the input
Answer» E.
950.

The OEICs realization __________ as compared to the other developments in IO.

A. Scripted
B. Decreased
C. Lagged behind
D. Increased
Answer» D. Increased