MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Which of the following can be a result of spinal disk herniation? |
| A. | Sciatica |
| B. | Spondylolisthesis |
| C. | Spondylosis |
| D. | Peripheral Vascular Disease |
| Answer» B. Spondylolisthesis | |
| 2. |
The nerve impulses are actually _______ |
| A. | ATP |
| B. | Action Potential |
| C. | Re-polarization of nerves |
| D. | Perception |
| Answer» C. Re-polarization of nerves | |
| 3. |
The type of operand that is not allowed to use in boolean instructions of 8051 is |
| A. | direct register operands |
| B. | indirect register operands |
| C. | immediate bit |
| D. | none |
| Answer» D. none | |
| 4. |
The mnemonic, JNB is used to jump to the specified relative address only if |
| A. | specified bit=1 |
| B. | specified bit=0 |
| C. | specified bit is non-recursive |
| D. | none |
| Answer» B. specified bit=0 | |
| 5. |
The mnemonic used to perform a subtraction of source with an 8-bit data and jumps to specified relative address if subtraction is non-zero is |
| A. | DJNZ |
| B. | CJNE |
| C. | JZ |
| D. | JNC |
| Answer» C. JZ | |
| 6. |
Which of the following is not a conditional control transfer instruction? |
| A. | JC |
| B. | JBC |
| C. | JNC |
| D. | NONE |
| Answer» E. | |
| 7. |
If the most significant bit of relative address byte is 1, then the short jump instruction is |
| A. | forward jump |
| B. | back jump |
| C. | either forward or back jump |
| D. | none |
| Answer» C. either forward or back jump | |
| 8. |
Whiskey cannot be prepared from ___________ |
| A. | barley malt |
| B. | grapes |
| C. | corn |
| D. | rye |
| Answer» C. corn | |
| 9. |
Light beers of low calorific value have become popular in recent times. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 10. |
Rum is prepared from __________ |
| A. | grapes |
| B. | barley malt |
| C. | molasses |
| D. | corn |
| Answer» D. corn | |
| 11. |
Which of the following enzyme is not used in the brewing industry? |
| A. | Fungal α-amylase |
| B. | β-glucanase |
| C. | Papain |
| D. | Pectinesterase |
| Answer» E. | |
| 12. |
Which of the enzyme acts on elimination reaction which releases oligosaccharides with non-reducing terminal 4-deoxymethyl-a-D-galact-4-enuronosyl residues? |
| A. | Pectin lyase |
| B. | Cellulase |
| C. | Hemicellulase |
| D. | Pectinesterase |
| Answer» B. Cellulase | |
| 13. |
Which of the following enzymes are not a part of hemicellulase? |
| A. | xylan endo-1,3-b-xylosidase |
| B. | xylan 1,4-b-xylosidase |
| C. | Pectinesterase |
| D. | L- rabinofuranosidase |
| Answer» D. L- rabinofuranosidase | |
| 14. |
____________ releases methanol from pectyl-methyl esters. |
| A. | Pectin lyase |
| B. | Pectinesterase |
| C. | Cellulase |
| D. | Hemicellulase |
| Answer» C. Cellulase | |
| 15. |
Which of the following enzyme hydrolyzes 1,4-a-D-galactosiduronic linkages randomly? |
| A. | Polygalacturonase |
| B. | Pectinesterase |
| C. | Pectin lyase |
| D. | Hemicellulase |
| Answer» B. Pectinesterase | |
| 16. |
Which of the following is not a part of enzyme preparation produced from Aspergillus Niger? |
| A. | Polygalacturonase |
| B. | Pectinesterase |
| C. | Cellulase |
| D. | Hemicellulase |
| Answer» D. Hemicellulase | |
| 17. |
Which of these is not an additional benefit produced by enzymic hydrolysis in preparation of fruit juices and wines? |
| A. | Solution viscosity |
| B. | Volume increase |
| C. | Scoopability improvement |
| D. | Shorter fermentation times |
| Answer» D. Shorter fermentation times | |
| 18. |
In the preparation of fruit juices and wines, enzymic hydrolysis becomes necessary. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 19. |
_________ is a Board placed parallel to the Ledgers and supported between the Putlogs. |
| A. | Toe board |
| B. | Guard rail |
| C. | Raker |
| D. | Bolts |
| Answer» B. Guard rail | |
| 20. |
________ is a piece which is used to bridge an opening in a wall and it supports one end of the putlog at the opening. |
| A. | Transoms |
| B. | Braces |
| C. | Rope |
| D. | Bridle |
| Answer» E. | |
| 21. |
_________ are the vertical members of the framework and they are either supported on the ground or embedded into the ground. |
| A. | Ledgers |
| B. | Standards |
| C. | Putlogs |
| D. | Rakers |
| Answer» C. Putlogs | |
| 22. |
In __________ type of scaffolding, in place of timber, the Steel tubes can be effectively used for the scaffolding work. |
| A. | Steel scaffolding |
| B. | Patented scaffolding |
| C. | Suspended scaffolding |
| D. | Trestle scaffolding |
| Answer» B. Patented scaffolding | |
| 23. |
The temporary framework is known as __________ and it is useful in construction demolition, maintenance or repair works. |
| A. | Underpinning |
| B. | Shoring |
| C. | Scaffolding |
| D. | Grouting |
| Answer» D. Grouting | |
| 24. |
Which of the following is used in molecular encapsulation of drugs for enhancing bioavailability? |
| A. | Highly water-soluble compound |
| B. | Cyclodextrin |
| C. | Inorganic clays like bentonite |
| D. | Creating metastable polymorphs |
| Answer» C. Inorganic clays like bentonite | |
| 25. |
In the below picture which form of solid solution of griseofulvin with succinic acid is shown? |
| A. | Solid solution |
| B. | Eutectic mixture |
| C. | Micronized drug |
| D. | Coarse drug |
| Answer» B. Eutectic mixture | |
| 26. |
Which of the following is used in solid solutions method of enhancing bioavailability? |
| A. | Highly water-soluble compound |
| B. | Organic solvent |
| C. | Inorganic clays like bentonite |
| D. | Creating metastable polymorphs |
| Answer» B. Organic solvent | |
| 27. |
Which of the following is used in the solvent deposition method of enhancing bioavailability? |
| A. | Freeze drying |
| B. | Organic solvent |
| C. | Inorganic clays like bentonite |
| D. | Creating metastable polymorphs |
| Answer» C. Inorganic clays like bentonite | |
| 28. |
Which one of the following is used for selective adsorption on insoluble carriers of the drugs? |
| A. | Freeze drying |
| B. | Organic solvent |
| C. | Inorganic clays like bentonite |
| D. | Creating metastable polymorphs |
| Answer» D. Creating metastable polymorphs | |
| 29. |
How pH alteration of the drug microenvironment is done? |
| A. | Altering the pH while the administration |
| B. | In situ salt formation |
| C. | Altering the pH of the tissue |
| D. | Formulating the drug in such a way that it gets activated only when it reaches the tissue pH |
| Answer» C. Altering the pH of the tissue | |
| 30. |
Salts improve solubility and dissolution characteristics. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 31. |
What is the principle behind the use of surfactants? |
| A. | Reducing the size of solid drug particles |
| B. | Enhancing the dissolution rate by promoting wetting |
| C. | Improving solubility |
| D. | Alter the pH of the microenvironment |
| Answer» C. Improving solubility | |
| 32. |
What will be the particle size after micronization of drugs? |
| A. | 1-10 micron |
| B. | 10-20 micron |
| C. | 20-30 micron |
| D. | 1-5 micron |
| Answer» B. 10-20 micron | |
| 33. |
Which of the following is not an approach for overcoming bioavailability problems? |
| A. | Pharmaceutic approach |
| B. | Pharmacokinetic approach |
| C. | Biologic approach |
| D. | Partition coefficient approach |
| Answer» E. | |
| 34. |
A drug with poor stability means higher bioavailability. |
| A. | True |
| B. | False |
| Answer» C. | |
| 35. |
Poor bioavailability means poor aqueous solubility. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 36. |
The maximum legal axle wheel load is _________ kg as specified by IRC. |
| A. | 3473 |
| B. | 5466 |
| C. | 8170 |
| D. | 4085 |
| Answer» D. 4085 | |
| 37. |
The base course must possess low resistance to deformation. |
| A. | False |
| B. | True |
| Answer» B. True | |
| 38. |
The strength of sub-grade is increased by _________ |
| A. | compaction |
| B. | swelling |
| C. | bulking |
| D. | addition of excess of water |
| Answer» B. swelling | |
| 39. |
The sub-base is __________ |
| A. | below the base course |
| B. | above the base course |
| C. | below the sub-grade |
| D. | above the wearing course |
| Answer» B. above the base course | |
| 40. |
The base course contains __________ |
| A. | granular material |
| B. | bituminous material |
| C. | silt |
| D. | clay |
| Answer» B. bituminous material | |
| 41. |
The wearing course is flexible. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 42. |
The wearing course of flexible pavement is made of __________ |
| A. | bituminous materials |
| B. | R.C.C |
| C. | P.C.C |
| D. | OPC |
| Answer» B. R.C.C | |
| 43. |
In flexible pavement, _______ sub grade is more essential. |
| A. | well – compacted |
| B. | poorly-compacted |
| C. | low quality |
| D. | uniform |
| Answer» C. low quality | |
| 44. |
The weaving course is also known as _________ |
| A. | base course |
| B. | surfacing |
| C. | sub-base |
| D. | subgrade |
| Answer» C. sub-base | |
| 45. |
The uniform sub grade support is most important in ___________ |
| A. | flexible pavement |
| B. | semi-flexible pavement |
| C. | rigid pavement |
| D. | tar pavement |
| Answer» D. tar pavement | |
| 46. |
The rigid pavement tends to distribute the load by ______ |
| A. | slab mechanism |
| B. | grain to grain transfer |
| C. | column mechanism |
| D. | footing mechanism |
| Answer» B. grain to grain transfer | |
| 47. |
‘Cost estimating errors’ is an indicator of which functional element while measuring the performance of an organization? |
| A. | Research and development |
| B. | Production |
| C. | Human resources |
| D. | Customers |
| Answer» B. Production | |
| 48. |
Which of the following is not an indicator of the ‘research and development’ functional element while measuring the performance of an organization? |
| A. | New product time to market |
| B. | The time needed to launch a new product |
| C. | Design change orders |
| D. | Revenue growth |
| Answer» E. | |
| 49. |
‘Just-in-time delivery target’ is an indicator of which functional element while measuring the performance of an organization? |
| A. | Research and development |
| B. | Suppliers |
| C. | Human resources |
| D. | Customers |
| Answer» C. Human resources | |
| 50. |
Which of the following is not an indicator of the ‘suppliers’ functional element while measuring the performance of an organization? |
| A. | SPC charts |
| B. | Billing accuracy |
| C. | Average lead time |
| D. | Lead time for product development |
| Answer» E. | |