

MCQOPTIONS
Saved Bookmarks
This section includes 10 Mcqs, each offering curated multiple-choice questions to sharpen your Aircraft Design knowledge and support exam preparation. Choose a topic below to get started.
1. |
Determine the value for maximum camber for NACA1235 airfoil. Given chord is 1m. |
A. | 0.01m |
B. | 0.02m |
C. | 0.021 |
D. | 0.012 |
Answer» B. 0.02m | |
2. |
For a cambered airfoil section lift is 30N. Airfoil is operating in such way that dynamic lift is 20N. Determine the lift co-efficient for the airfoil. |
A. | 1.5 |
B. | 1.5N |
C. | 0.5 |
D. | 0.5N |
Answer» B. 1.5N | |
3. |
A thin airfoil is defined as NACA 0009 is at = 5 . What is the value of lift curve slope? |
A. | 2 per rad |
B. | 2 per degree |
C. | 4 per degree |
D. | 0.4 per degree |
Answer» B. 2 per degree | |
4. |
An airfoil with symmetric profile has pitching moment about aerodynamic centre as 13 Nm at 4 AOA. Determine Pitching moment at same point if AOA is increased by 8 . |
A. | 13Nm |
B. | 8Nm |
C. | 5Nm |
D. | 13Ncm |
Answer» B. 8Nm | |
5. |
Camber represents the curvature of an airfoil. |
A. | True |
B. | False |
Answer» B. False | |
6. |
Determine the corrections or otherwise of the following assertion [A] and reason [R]:
|
A. | nReason[R]: Perfect sharp trailing edge is difficult to build. |
B. | Both [A] and [R] are true and [R] is the correct reason for [A] |
C. | Both [A] and [R] are true but [R] is not the correct reason for [A] |
D. | [A] is true but [R] is false |
E. | [A] is false but [R] is true |
Answer» B. Both [A] and [R] are true and [R] is the correct reason for [A] | |
7. |
The straight line joining L.E. and T.E. of an airfoil is _______ |
A. | chord line |
B. | camber |
C. | camber line |
D. | radii |
Answer» B. camber | |
8. |
NACA stands for _____ |
A. | National Advisory Committee for Aeronautics |
B. | National Authorized Committee for Aeronautics |
C. | National Advisory Committee for Aero models |
D. | National Advisory Committee for Arithmetic |
Answer» B. National Authorized Committee for Aeronautics | |
9. |
Which of the following is not an application of an airfoil? |
A. | To provide thrust for acceleration |
B. | To provide lift |
C. | To provide lift co-efficient |
D. | To provide streamlined flow |
Answer» B. To provide lift | |
10. |
If an airfoil is operating at Mach 1.1, then it is working in _____ |
A. | transonic range |
B. | supersonic range |
C. | subsonic range |
D. | hypersonic range |
Answer» B. supersonic range | |