Explore topic-wise MCQs in Farm Machinery.

This section includes 8 Mcqs, each offering curated multiple-choice questions to sharpen your Farm Machinery knowledge and support exam preparation. Choose a topic below to get started.

1.

A diesel tractor consumes 5 litres per hour of fuel whose density is 0.836 kg per litre. The heating value of the fuel is 45.4 MJkg-1. If the thermal efficiency of the engine is 0.30, the transmission efficiency is 0.90 and the tractive efficiency is 0.75, the drawbar power of the tractor will be __________

A. 10.54 KW
B. 13.18 KW
C. 18.98 KW
D. 39.53 KW
Answer» B. 13.18 KW
2.

Which of the following stages is the last stage of the combustion process in diesel engine?

A. Period of rapid pressure rise and heat transmission
B. Period of after burn
C. Period of direct burning of later injected fuel
D. Delay period before ignition
Answer» C. Period of direct burning of later injected fuel
3.

Which of the following is not a feature of diesel engine?

A. Engine has compression ratio 14:1 to 22:1
B. The control by hand lever or pedal lever is easy
C. Ignition takes place due to heat of compression only
D. During compression stroke, the engine attains high pressure ranging from 30 to 45 kg/cm<sup>2</sup>
Answer» C. Ignition takes place due to heat of compression only
4.

Which of the following is not a method of supplying fuel to the jet of the carburettor?

A. Suction method
B. Throttle system
C. Overflow method
D. Float valve method
Answer» C. Overflow method
5.

What is the viscosity index for an oil having viscosity = 100s at 38 C? (L=137.9; H=107.1)

A. 132.38
B. 285.38
C. 120.06
D. 122.72
Answer» E.
6.

What is the quantity of water which is to be circulated through the radiator, if diesel tractor developed 80 KW with coolant temperature difference 5.5 C?

A. 9.44 L/s
B. 10.01 L/s
C. 7.44 L/s
D. 8.44 L/s
Answer» D. 8.44 L/s
7.

Cooling system of a 6.8 KW diesel engine at full load will remove heat at a rate of ________

A. 1.63 calories/min
B. 6.80 calories/min
C. 97.6 calories/min
D. 408 calories/min
Answer» D. 408 calories/min
8.

Which is the third port, apart from exhaust and suction ports used in two-stroke engine?

A. Transfer port
B. Transport valve
C. Top dead centre
D. Bottom dead centre
Answer» B. Transport valve