The W.E.S downstream profile of an ogee spillway can be represented by – McqOptions

MCQOPTIONS

1.	The W.E.S downstream profile of an ogee spillway can be represented by an equation:Xⁿ = K Hdⁿ⁻¹. YWhere x and y are the coordinates of the points on the crest profile and K and n for a vertical upstream spillway would respectively be___________________
A.	2.0 and 1.85
B.	0.5 and 1.85
C.	2.0 and 0.85
D.	0.5 and 0.85
Answer» B. 0.5 and 1.85

Discussion

No Comment Found

Related MCQs

_____________________ are suitable only for low spillways or weirs.
In the case of dam spillways, the approaching Froude number usually lies in the range of __________
The energy dissipation at the toe of the spillway is affected basically by the use of hydraulic jump in _______________________
The formation of hydraulic jump at the foot of a spillway is one of the common methods of energy dissipation because ______________________
The most ideal condition for energy dissipation in the design of spillways is the one when the tail-water rating curve coincides with the jump rating curve at all discharge.
For a saddle siphon, the maximum operative head is 4.53 m. The width and height of the throat of the siphon are 5 m and 2.25 m respectively. The coefficient of discharge is 0.90. How many units are required to pass a flood of 350 cumecs? (Assume g = 10 m/s2)
Standard USBR stilling basin-II is useful for energy dissipation at the bottom of the overflow structure, if the approaching Froude number is ________________
When the tail-water depths in the river downstream of a spillway are quite low such that the tail-water curve at all discharges lies below the post jump depth curve, then the energy dissipation can be affected best by ___________________
The allowable maximum negative head on an average is equal to __________
In a fixed roller of a spillway gate, the rollers are attached to the __________________