The system function H(s) = 1s + 1For an input signal cos t, the steady – McqOptions

MCQOPTIONS

→

The system function H(s..

1.

The system function H(s) = 1
s + 1

For an input signal cos t, the steady state response is

A.

cos t

Answer» B.

Discussion

No Comment Found

Related MCQs

A series RLC circuit consisting of R = 10 ohms, X<sub>L</sub> = 20 ohms and X<sub>c</sub> = 20 ohms is connected across an ac supply of 100 V (rms). The magnitude and phase angle (with reference to supply voltage) of the voltage across the inductive coil are respectively
A 3 V dc supply with an internal resistance of 2 &ohm; supplies a passive non-linear resistance characterized by the relation V<sub>NL</sub> = I<sup>2</sup> <sub>NL</sub>. The power dissipated in the non-linear resistance is
The Thevenin s equivalent of a circuit operating at = 5 rad/s, has V<sub>oc</sub> = 3.71 15.9 V and Z<sub>0</sub> = 2.38 j 0.667 &ohm; . At this frequency, the minimal realization of the Thevenin s impedance will have a
An average-reading digital multimeter reads 10 V when fed with a triangular wave, symmetric about the time-axis. For the same input an rmsreading meter will read
A coil of 300 turns is wound on a non-magnetic core having a mean circumference of 300 mm and a cross-sectional area of 300 mm<sup>2</sup>. The inductance of the coil corresponding to a magnetizing current of 3A will be (Given that <sub>0</sub> = 4 10<sup> 7</sup> H/m)
A capacitor consists of two metal plates each 500 500 mm<sup>2</sup> and spaced 6 mm apart. The space between the metal plates is filled with a glass plate of 4 mm thickness and a layer of paper of 2 mm thickness. The relative permittivities of the glass and paper are 8 and 2 respectively. Neglecting the fringing effect, the capacitance will be (Given that <sub>0</sub> = 8.85 10<sup> 12</sup> F/m)
Divergence of the vector field V (x, y, z) = (x cos xy + y) i + (y cos xy) j + (sin z<sup>2</sup> + x<sup>2</sup> + y<sup>2</sup>) k is
Two point charges Q<sub>1</sub> = 10 C and Q<sub>2</sub> = 20 C are placed at coordinates (1, 1, 0) and ( 1, 1, 0) respect ively. The total electric flux passing through a plane z = 20 will be
<table><tr><td rowspan="2">Consider the following statements with reference to the equation </td><td style="border-bottom:1px solid #000000;vertical-align:bottom;padding-bottom:2px;"><center> p</center></td><td rowspan="2"> </td></tr><tr><td style="text-align: center;"> t</td></tr></table><br>1. This is a point form of the continuity equation <br>2. Divergence of current density is equal to the decrease of charge per unit volume per unit at every point <br>3. This is Max well's divergence equation <br>4. This represents the conservation of charge Select the correct answer:
An incandescent lamp is marked 40W, 240V. If resistance at room temperature (26 C) is 120 &ohm; and temperature coefficient of resistance is 4.5 10<sup> 3/ C</sup> , then its ON state filament temperature in C is approximately ___________.