The standard practice for sizing the exhaust valve is to make them a c – McqOptions

MCQOPTIONS

1.	The standard practice for sizing the exhaust valve is to make them a certain percentage ____________ than the inlet valves.
A.	larger
B.	smaller
C.	unpredictable
D.	none of the mentioned
Answer» C. unpredictable

Discussion

No Comment Found

Related MCQs

The frictional mean effective pressure ____________ as the compression ratio is increased.
When a smaller number of large cylinders are used, the friction and economy improve.
Blowby losses ____________ directly with compression ratio.
____________ losses are caused due to the leakage of combustion products past the piston from the cylinder into the crankcase.
BLOWBY_LOSSES______________DIRECTLY_WITH_COMPRESSION_RATIO.?$
The frictional mean effective pressure ____________ as the compression ratio is increased.$
When_a_smaller_number_of_large_cylinders_are_used,_the_friction_and_economy_improve.$
____________ losses are caused due to the leakage of combustion products past the piston from the cylinder into the crankcase?
Combustion chamber pump loss is caused due to the pumping work required to pump gases into and out of the pre-combustion chamber.
The exhaust throttling loss occurs due to the restrictions imposed by air cleaner, carburetor venturi, throttle valve, intake manifold and intake valve.