The number of current paths equals the number of resistors in parallel – McqOptions

MCQOPTIONS

1.	The number of current paths equals the number of resistors in parallel.
A.	1
B.
Answer» B.

Discussion

No Comment Found

Related MCQs

The following resistors are in parallel across a voltage source: 220 , 470 , and 560 . The resistor with the least current is
Three 47 resistors are connected in parallel across a 110 volt source. The current drawn from the source is approximately
In a certain three-branch parallel circuit, has 12 mA through it, has 15 mA through it, and has 25 mA through it. After measuring a total of 27 mA, you can say that
Four resistors are connected in parallel. Fifteen mA flows through resistor If the second resistor is 2, the third resistor 3, and the fourth resistor 4, the total current in the circuit is
Six resistors are in parallel. The two lowest-value resistors are both 1.2 k. The total resistance
Four resistors of equal value are connected in parallel. If the total voltage is 15 V and the total resistance is 600 , the current through each parallel resistor is
Five 100 resistors are connected in parallel. If one resistor is removed, the total resistance is
Four 8 speakers are connected in parallel to the output of an audio amplifier. If the maximum voltage to the speakers is 12 V, the amplifier must be able to deliver to the speakers
An ammeter has an internal resistance of 50 . The meter movement itself can handle up to 1 mA. If 10 mA is applied to the meter, the shunt resistor, , is approximately
The total resistance of a parallel circuit is 50 . If the total current is 120 mA, the current through the 270 resistor that makes up part of the parallel circuit is approximately