The following factors need consideration for the optimum design of fin – McqOptions

MCQOPTIONS

1.	The following factors need consideration for the optimum design of fins(i) Cost(ii) Space considerations(iii) Weight considerationsChoose the correct option
A.	1 only
B.	1 and 2 only
C.	1, 2 and 3
D.	2 only
Answer» D. 2 only

Discussion

No Comment Found

Related MCQs

Which one is true regarding parabolic fin?
For what purpose we use thermometric well?
Which fin yields the maximum heat flow per unit weight?
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m² K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube without fin
Suppose there are two reservoirs A and B. Let TA and TB be the temperatures of respective reservoirs. At any instant say TA = TB. In this case maximum temperature occurs at
Heat dissipation by every segment of the fin is
“If a fin of a constant cross section is used, there would be wastage of material”. Chose the correct option.
“The diameter of well does not have any effect on temperature measurement by the thermometer”. Choose the correct option
For parabolic fin, the curve follows which law?
If heat conducted into the element at plane x is Q X = – k A C (d t/d x) X. Then heat conducted out of the element at plane (x + d x) is