The discharge passing over an ogee spillway per unit length of its ape – McqOptions

MCQOPTIONS

1.	The discharge passing over an ogee spillway per unit length of its apex line is proportional ___________________
A.	H
B.	H<sup>2</sup>
C.	H<sup>1/2</sup>
D.	H<sup>3/2</sup>
Answer» E.

Discussion

No Comment Found

Related MCQs

Calculate the effective length of the spillway which consists of 6 spans having a clear width of 10 m each. The thickness of each pier may be taken as 2.5 m and the total design head on the crest including velocity head is 16.3 m. Assuming 90 cut water nose piers and rounded abutments.
The greater is the divergence from the streamline flow, greater is the contraction coefficient.
What is the assumption that is taken during the entire design of an overflow spillway?
What is the value of abutment contraction coefficient for square abutment with headwall perpendicular to the direction of flow?
What is the value of the pier abutment coefficient for pointed nose piers?
The downstream apron of the ogee spillway is found to have a negligible effect on the coefficient of discharge when the value of ________________
If a flood enters a dam reservoir at F.R.L, the efficiency of its ogee spillway will ______________
The velocity of approach has found to be negligible effect upon discharge if ____________
When the gated sluices are provided through the body of the dam spillway then the ogee spillway structure shall normally be of Corbel type.
When the crest of an ogee spillway is designed to be in accordance with the lower nappe of a free-falling water jet over a duly ventilated sharp-crested weir then theoretically