Power consumption by agitation is – McqOptions

MCQOPTIONS

1.	Power consumption by agitation is
A.	a function of operating conditions
B.	a function of physical properties
C.	all of the above
D.	a function of vessel and impeller geometry
Answer» D. a function of vessel and impeller geometry

Discussion

No Comment Found

Related MCQs

The oxygen uptake requirements of a microbial population is characterized by the following parameters: μm = 0.2 h-1, K0 = 0.2 mg O2.l-1, Y0 = 0.5 mg dry weight/mg O2 and C0,crit=0.8 mg.l-1 The required concentration of cells is 1000 mg.l-1 and the saturation oxygen concentration of the medium is 5.8 mg.l-1. The required KLa must be greater than
In a bioreactor, if at a particular time the oxygen transfer rate is 23 kg.h-1, then the oxygen uptake will be
A fermentation system has a KLa of 3 s-1 and a C0* of 5 ppm of O2. If the bulk liquid is completely depleted of oxygen, then the oxygen transfer rate will be equal to
A fermentation system has a KLa of 3 s-1 and a C0* of 5 ppm of O2. If the bulk liquid is saturated with oxygen then the oxygen transfer rate will be equal to
The effect of increasing the stirrer speed in an unbaffled stirred tank reactor is that
The oxygen absorption rate can be determined by
Industrial paddle agitators turn at the speed of
The main function of the dimples provided in the cooling jacket is to
The advantage of axial flow impellers over radial flow impellers is that axial flow impellers
Axial flow impellers