In the circuit shown in the figure, if ω = 40 rad/s, then Zin is ____

1.	In the circuit shown in the figure, if ω = 40 rad/s, then Zin is _____________
A.	4.77 – j1.15 Ω
B.	2.96 – j0.807 Ω
C.	2.26 – j3.48 Ω
D.	2.26 – j3.48 Ω
Answer» C.

Discussion

No Comment Found

Related MCQs

A 50 μF capacitor, when connected in series with a coil having resistance of 40Ω, resonates at 1000 Hz. The circuit is in resonating condition. The voltage across the coil is __________
A 50 μF capacitor, when connected in series with a coil having resistance of 40Ω, resonates at 1000 Hz. The circuit current if the applied voltage is 100 V for the resonant circuit is ___________
A 50 μF capacitor, when connected in series with a coil having a resistance of 40Ω, resonates at 1000 Hz. The circuit is in resonating condition. The voltage across the capacitor is __________
The time constant for the given circuit under resonance condition will be?
The frequency for the given circuit when the circuit is in a state of resonance will be?
In a series circuit with R = 10Ω and C = 25 μF, at what frequency will the current lead the voltage by 30°?
The RL circuit in the below figure is fed from a constant magnitude, variable frequency sinusoidal voltage source VIN. At 50 Hz, the R and L elements each have a voltage drop Vrms. If the frequency of the source is changed to 25 Hz, the new voltage drop across R is ___________
An ideal capacitor is charged to a voltage V and connected at t=0 across an ideal inductor L. If we take ω = \(\frac{1}{\sqrt{LC}}\), the voltage across the capacitor at time t>0 will be?
The circuit shown in the figure below will act as an ideal source with respect to terminal A and B when the frequency is ___________
For the circuit shown in the figure below, the value of R for critical damping will be?

In the circuit shown in the figure, if ω = 40 rad/s, then Zin is _____________

Discussion

No Comment Found

Related MCQs

Reply to Comment