In order that the heat flows from one part of a solid to another part, – McqOptions

MCQOPTIONS

1.	In order that the heat flows from one part of a solid to another part, what is required?
A.	Uniform density
B.	Temperature gradient
C.	Density gradient
D.	Uniform temperature
Answer» C. Density gradient

Discussion

No Comment Found

Related MCQs

During constant temperature, we feel colder on the day when the humidity is ___________
The triple point of water is ___________
A black body at 200 K is found to emit maximum energy at a wavelength 14μm. When its temperature is raised to 1000K, then wavelength at which maximum energy emitted it?
A black body radiates energy at the rate of 1×105 J/(sm)2 at a temperature of 227°C. The temperature to which it must be heated so that it radiates energy at the rate of 1×109 J/(sm)2.
A perfectly black body is one whose ___________
Mud houses are cooler in summer and warmer in winter because ___________
Two rods having thermal conductivity in the ratio of 5:3 having equal lengths and equal cross-sectional area are joined end to end. If the temperature of the free end of the first rod is 100°C and free end of the second rod is 20°C, then the temperature of the junction is?
A body A of mass 0.5kg and specific heat 0.85 is at a temperature of 60°C. Another body B of mass 0.3kg and specific heat 0.9 is at a temperature of 90°C. When they are connected to a conducting rod, heat will flow from ___________
If the temperature of a rod is increased by 10°C, its length increases by 1%. What is the percentage change in volume of the body of the same material for 10°C increase in temperature?
Amount of heat required to raise the temperature of a body through 1K is called ___________