If Vref is the output reference value and Vfs is the ideal full-scale output voltage when the digital inputs are all 1. Which of the following equation is correct?

\(V_{ref}=V_{fs}\left(\dfrac{1}{2^n}-1\right)\)

\(V_{ref}=V_{fs}\left(1-\dfrac{1}{2^n}\right)\)

\(V_{fs}=V_{ref}\left(\dfrac{1}{2^n}-1\right)\)

\(V_{fs}=V_{ref}\left(1-\dfrac{1}{2^n}\right)\)

If Vref is the output reference value and Vfs is the ideal full-scale

1.	If Vref is the output reference value and Vfs is the ideal full-scale output voltage when the digital inputs are all 1. Which of the following equation is correct?
A.	\(V_{ref}=V_{fs}\left(1-\dfrac{1}{2^n}\right)\)
B.	\(V_{fs}=V_{ref}\left(\dfrac{1}{2^n}-1\right)\)
C.	\(V_{fs}=V_{ref}\left(1-\dfrac{1}{2^n}\right)\)
D.	\(V_{ref}=V_{fs}\left(\dfrac{1}{2^n}-1\right)\)
Answer» D. \(V_{ref}=V_{fs}\left(\dfrac{1}{2^n}-1\right)\)

Discussion

No Comment Found

Related MCQs

An ammeter requires a change of 3 A in its coil to produce a change in deflection of the pointer by 12 mm. Its sensitivity is
An instrument has sensitivity of 1000 ohm/volt. On the 100 volt scale, this instrument will have internal resistance of:
Consider the following statements regarding precision in measurements of a quantity:1. Precision is the measure of the spread of the incident errors.2. Precision is independent of the realizable correctness of the measurement.3. Precision is usually described in terms of number of digits used in the measurement by a digital instrument.Which of the above statements are correct?
If meter A requires 100 mA to give full-scale deflection, meter B requires 50 mA to give scale deflection and meter C requires 80 mA to give full-scale deflection, then the
Full scale deflection current of a D’Arsonval movement is 10 mA and internal resistance is 100 Ω. If it is converted to a multirange voltmeter, the value of multiplier required for voltage of 0-50 V is:
During the measurement of voltage, the voltmeter responded with a 0.18-V change when the input was varied by 0.2 V. Find the sensitivity of the instrument.
A LVDT produces an RMS output voltage of 2.6 V for displacement of 0.4 μm. Calculate the sensitivity of LVDT.
Find the total resistance of a voltmeter if the range of voltmeter is 50 V and sensitivity is 20 kΩ/V.
Find the vertical and horizontal resolutions, respectively, used in a TV system in USA where NT = 525, NL = 42
Precision is compose of two characteristics, one is the number of significant figures to which a measurement may be made, the other is

If Vref is the output reference value and Vfs is the ideal full-scale output voltage when the digital inputs are all 1. Which of the following equation is correct?

Discussion

No Comment Found

Related MCQs

Reply to Comment