If velocity is 5m/s, then velocity factor for a cut teeth is – McqOptions

MCQOPTIONS

1.	If velocity is 5m/s, then velocity factor for a cut teeth is
A.	0.55
B.	0.66
C.	1.55
D.	1.66
Answer» B. 0.66

Discussion

No Comment Found

Related MCQs

If service factor is 1.4 & tangential ad dynamic load is 1180N and 1500N respectively, then calculate the effective load.
Calculate the wear strength for a pair of bevel gears having face width=20mm, module=5mm, No of teeth on pinion and gear 25 and 40 respectively and PCD of pinion=75mm.
If surface hardness for a par of bevel gears is 400BHN, then material constant is
Calculate the ratio factor Q if a pair of bevel gear consist of 25 teeth pinion meshing with a 40 teeth gear.
If velocity is 5m/s, then velocity factor for generated teeth is
CALCULATE_THE_RATIO_FACTOR_Q_IF_A_PAIR_OF_BEVEL_GEAR_CONSIST_OF_25_TEETH_PINION_MESHING_WITH_A_40_TEETH_GEAR.?$
Calculate the wear strength for a pair of bevel gears having face width=20mm, module=5mm, No of teeth on pinion and gear 25 and 40 respectively and PCD of pinion=75mm.$
If_surface_hardness_for_a_par_of_bevel_gears_is_400BHN,_then_material_constant_is$
If_service_factor_is_1.4_&_tangential_ad_dynamic_load_is_1180N_and_1500N_respectively,_then_calculate_the_effective_load.
If velocity is 5m/s, then velocity factor for generated teeth i?