If the peak load for a power plant equals the plant capacity then the – McqOptions

MCQOPTIONS

1.	If the peak load for a power plant equals the plant capacity then the ratio of the capacity factor to load factor will be _________________
A.	1
B.	0
C.	< 1
D.	> 1
Answer» B. 0

Discussion

No Comment Found

Related MCQs

What is the highest elevation of water level that can be maintained in the reservoir without any spillway discharge either with gated or non-gated spillway?
400 cumecs of water are being released from dam storage to meet the downstream demand through the turbines of the connected hydro plant. The effective head of water acting on the turbines is 50 m. The efficiency of the hydro plant is 0.8. The electrical power generated from this plant is __________________
If the peak load on a power plant having a capacity of 100 MW is 70 MW during a given week. Calculate the utilization factor.
Calculate utilisation factor if the maximum power utilised is 40,000 kW and two turbo generators installed each of capacity 23,000 kW.
The load on a hydel plant varies from a minimum of 10,000 kW to a maximum of 35,000 kW. Two turbo-generators of capacities 20,000 kW each have been installed. Calculate Plant factor.
The difference of head at the point of entry and exit of turbine is _______________
To ensure maximum overall plant efficiency, the rated head should be equal to ______________
The value of power factor is generally _____________________
The net amount of power which is continuously available from a plant without any break is known as _____________
The ratio of maximum power utilised to the maximum power available is _____________