For laminar flow, Prandtl number must be more than

1.	For laminar flow, Prandtl number must be more than
A.	0.05
B.	0.2
C.	0.6
D.	0.3
Answer» D. 0.3

Discussion

No Comment Found

Related MCQs

Is laminar flow used in the smooth flow of a viscous liquid through a tube?
The correlation for liquid metal is given by
For a plate of length l, an average value of Nusselt number is given by
The local film coefficient for laminar flow past a flat plate may be obtained from the correlation
Air at atmospheric pressure and 20 degree Celsius flows with 6 m/s velocity through main trunck duct of air conditioning system. The duct is rectangular in cross-section and measures 40 cm by 80 cm. Determine heat loss per meter length of duct corresponding to unit temperature difference. The relevant thermos-physical properties of air arev = 15 * 10 -6 m 2/sα = 7.7 * 10 -2 m2/hrk = 0.026 W/m degree
A horizontal heated plate at 200 degree Celsius and facing upwards has been placed in still air at 20 degree Celsius. If the plate measures 1.25 m by 1 m, make calculations for the heat loss by natural convection. The convective film coefficient for free convection is given by the following empirical relationh = 0.32 (α) 0.25 W/m2 KWhere α is the mean film temperature in degrees kelvin
A hot plate of 15 cm2 area maintained at 200 degree celsius is exposed to still air at 30 degree Celsius temperature. When the smaller side of the plate is held vertical, convective heat transfer rate is 15 per cent higher than bigger side of the plate is held vertical. Find size of the plate. The appropriate correlation for the convection coefficient isNu = 0.60 (Gr Pr) 0.25
The Nusselt number is related to Reynolds number in laminar and turbulent flows respectively as
IS_LAMINAR_FLOW_USED_IN_THE_SMOOTH_FLOW_OF_A_VISCOUS_LIQUID_THROUGH_A_TUBE??$
FOR_A_PLATE_OF_LENGTH_L,_AN_AVERAGE_VALUE_OF_NUSSELT_NUMBER_IS_GIVEN_BY?$

For laminar flow, Prandtl number must be more than

Discussion

No Comment Found

Related MCQs

Reply to Comment