For connecting lacing flats to column section with 18mm diameter bolt, – McqOptions

MCQOPTIONS

1.	For connecting lacing flats to column section with 18mm diameter bolt, the minimum width of flat required is
A.	36 mm
B.	54 mm
C.	72 mm
D.	90 mm
Answer» C. 72 mm

Discussion

No Comment Found

Related MCQs

The LZO compression format is composed of approximately __________ blocks of compressed data.
__________ typically compresses files to within 10% to 15% of the best available techniques.
Which of the following is based on the DEFLATE algorithm?
Which of the following is the slowest compression technique?
Which of the following supports splittable compression?
Which of the following compression is similar to Snappy compression?
As per IS 800 – 2007, the permitted slenderness ratio for a bracing member in case of hangers shall be
Effective buckling length of a steel angle connected by double rivets is
A battened column subjected to an axial force of 1100 kN. Battens are placed at 1.25 m centre to centre. Depth of batten plate is 300 mm, length is 363 mm, thickness is 6 mm and on two planes. The bending moment in the batten is:
A steel column (fy = 250 N/mm2, and fcd = 200 N/mm2) of effective sectional area 6000 mm2 will have strength equal to _____.